BAV70LT1G
₹125.00
Switching Diodes as a product
SMD/SMT mounting style
Peak Reverse Voltage: SOT-23-3 Package/Case: 70 V
Surge current maximum: 0.5 A
If: 200 mA Forward Current
Configuration: 1.25 V for the forward voltage, 6 ns for the reverse current, and 1.25 V for the forward current.
-55 C is the minimum operating temperature.
150 C is the maximum operating temperature.
Series: BAV70L
Containers: Reel
Cut tape for packaging
Containers: Mouse Reel
0.94 mm in height; 2.9 mm in length.
General-purpose, power, switching diodes are the product kind.
Diodes and rectifiers is a subcategory.
Switching diode, type
1.3 mm in width, 1.400 g in total
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisqueĀ vestibulum amet elit ut volutpat.
Related products
1.5KE11A (PACK OF 10)
The 1.5KE Series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
1.5SMC33CA
The 1.5SMC series was intended to safeguard critical electrical items against voltage transients caused by lightning and other transient voltage phenomena
Features
ā¢ 1500W peak pulse power capability at 10/1000s waveform, repetition rate (duty cycles):0.01%
ā¢ Excellent clamping capability
ā¢ Low incremental surge resistance
ā¢ Typical IR less than 1A when VBR min>12V
ā¢ Excellent clamping capability
ā¢ Low incremental surge resistance
ā¢ Typical IR less than 1A when VBR min>12V
ā¢ For surface mounted applications to optimise board space
ā¢ Low profile package
ā¢ Built-in strain relief
ā¢ Typical failure mode is short from over-specified voltage or current
ā¢ Whisker test is performed in accordance with JEDEC JESD201A table 4a and 4c
ā¢ IEC 61000-4-2 ESD 30kV (Air), 30kV (Contact)
Applications
TVS devices are essential to safeguard I/O interfaces, VCC buses, and other susceptible circuits in telecom, computer, and industrial applications.
1n4007 diode (Pack of 100)
The 1N4007 is the most commonly used rectifier diode. It is commonly used in rectifier circuits, protection circuits and regulator circuits. The lead near to the silver line is the cathode and the other lead is anode, current is allowed to flow only form anode to cathode. The specifications of the 1N4007 diode are:
Manufacturer Product Number:1N4007
Description: DIODE GEN PURP 1KV 1A DO41
Detailed Description: Diode 1000 V 1A Through Hole DO-41
AP2112K-3.3TRG1
The AP2112 is a guaranteed 600mA (min.) continuous load current, low dropout linear regulator in CMOS technology with enable function.
The fixed output voltage options for the AP2112 are 1.2V, 1.8V, 2.5V, 2.6V, or 3.3V. The LDO offers exceptional performance for coping with line and load transients because to its output precision of 1.5 percent and extremely quick loop response. The AP2112 has an auto discharge feature that, when the device is turned off, connects the output to earth through 60 ohms of resistance.
The regulator offers SOT25, SOT89-5, and SO-8 packaging and has a low power consumption. Previously known as SOT-23-5, SOT-89-5, and SOIC-8 packages, respectively, they have been renamed to conform to the most recent terminology used by Diodes Incorporated.
Features
Output voltage precision: 1.5 percent
600 mA is the output current (Min.)
Protection Against Foldback Short Current: 50mA
Enable the VOUT On/Off Function
@IOUT = 600mA Low Dropout Voltage (3.3V): 250mV (Typ.)
Excellent Line Regulation: 0.02 percent /V and 0.2 percent /A (Typ.) for the load regulation (Typ.)
Low Quiescent Current (Typ.): 55 A; Low Standby Current (Standard): 0.01 A (Typ.)
50VRMS Low Output Noise
OTSD Protection; PSRR: 100Hz -65dB, 1kHz -65dB
m7 diode (1n4007) (Pack of 100)
The M7(1N4007) Diode is aĀ Ā M7 Surface Mount General Rectifier and has a Plastic Passivation Junction Reverse Voltage of 50 to 1000 Volts with Forward Current of 1.0 Ampere.
m7 diode datasheet
P6SMB16A
The P6SMB series was created to protect sensitive electronic equipment against voltage transients such as those due to lightning and other transient voltage occurrences.
TVS devices are perfect for securing I/O interfaces, buses, and other susceptible circuits in Telecom, Computer, Industrial, and Consumer Electronics applications
Case:DO-214AA (SMB)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant and commercial grade
Base P/NHE3 - RoHS compliant and AEC-Q101 qualified
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified(ā_Xā denotes revision code e.g. A, B, .....)
Terminals:
Matte tin plated leads, solder able per J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test
Polarity:
For uni-directional types the band denotes
cathode end, no marking on bi-directional types
PTS645SH50SMTR9
Electrical
CONTACT RATING: 50 mA @ 12 V DC.
DIELECTRIC STRENGTH: 250 V AC min.
CONTACT RESISTANCE: 100 mā¦ max. initial.
INSULATION RESISTANCE: 10 ā¦ min.
Environmental
OPERATING TEMPERATURE: -20 ĢC to 60 ĢC
Mechanical
ACTUATION FORCE: PTS645 models: 130 grams, 160 grams,
200 grams, 260 grams
LIFE EXPECTANCY: 100,000 operations.
Specification
FUNCTION: Momentary action
CONTACT ARRANGEMENT: SPST, N.O.
TERMINALS: PC pins
Process
SOLDERING: Preheating to 100 ĢC for 45 sec. max. Keep flux flush
with top surface of PCB; do not apply to component side of PCB
and area where terminals are located. Soldering to 255 ĢC for 5 sec.
max. Clean by brushing on solder surface. Do not clean switch with
solvents.
Packaging
Bulk packaging.
Tape & reel for the SMT type:
Reel of 1,000 pieces
Reviews
There are no reviews yet.