1.5KE27CA (pack of 10)

The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in telecom, computer, industrial and consumer electronic applications.

The 1N4007 is the most commonly used rectifier diode. It is commonly used in rectifier circuits, protection circuits and regulator circuits. The lead near to the silver line is the cathode and the other lead is anode, current is allowed to flow only form anode to cathode. The specifications of the 1N4007 diode are: Manufacturer Product Number:1N4007 Description: DIODE GEN PURP 1KV 1A DO41 Detailed Description: Diode 1000 V 1A Through Hole DO-41

The AP2112 is a guaranteed 600mA (min.) continuous load current, low dropout linear regulator in CMOS technology with enable function. The fixed output voltage options for the AP2112 are 1.2V, 1.8V, 2.5V, 2.6V, or 3.3V. The LDO offers exceptional performance for coping with line and load transients because to its output precision of 1.5 percent and extremely quick loop response. The AP2112 has an auto discharge feature that, when the device is turned off, connects the output to earth through 60 ohms of resistance. The regulator offers SOT25, SOT89-5, and SO-8 packaging and has a low power consumption. Previously known as SOT-23-5, SOT-89-5, and SOIC-8 packages, respectively, they have been renamed to conform to the most recent terminology used by Diodes Incorporated. Features Output voltage precision: 1.5 percent 600 mA is the output current (Min.) Protection Against Foldback Short Current: 50mA Enable the VOUT On/Off Function @IOUT = 600mA Low Dropout Voltage (3.3V): 250mV (Typ.) Excellent Line Regulation: 0.02 percent /V and 0.2 percent /A (Typ.) for the load regulation (Typ.) Low Quiescent Current (Typ.): 55 A; Low Standby Current (Standard): 0.01 A (Typ.) 50VRMS Low Output Noise OTSD Protection; PSRR: 100Hz -65dB, 1kHz -65dB

AEC-Q101 qualified; excellent clamping capability; low dynamic impedance; 600W surge capability at 10/1000μs waveform; fast response time typically less than