LM317KTTR
The LM317 device is an adjustable three-terminal
positive-voltage regulator capable of supplying more
than 1.5 A over an output-voltage range of 1.25 V to
37 V. It requires only two external resistors to set the
output voltage. The device features a typical line
regulation of 0.01% and typical load regulation of
0.1%. It includes current limiting, thermal overload
protection, and safe operating area protection.
Overload protection remains functional even if the
ADJUST terminal is disconnected.
Features
1? Output voltage range adjustable
from 1.25 V to 37 V
? Output current greater than 1.5 A
? Internal short-circuit current limiting
? Thermal overload protection
? Output safe-area compensation
LM317T
Features
? Output voltage range: 1.2 to 37 V
? Output current in excess of 1.5 A
? 0.1% line and load regulation
? Floating operation for high voltages
? Complete series of protections: current limiting, thermal shutdown and SOA
control
Description
The LM217, LM317 are monolithic integrated circuits in TO-220, TO-220FP, D?PAK
and SOT223 packages intended for use as positive adjustable voltage regulators.
They are designed to supply more than 1.5 A of load current with an output voltage
adjustable over a 1.2 to 37 V range.
The nominal output voltage is selected by means of a resistive divider, making
the device exceptionally easy to use and eliminating the stocking of many fixed
regulators.
LM317T/NOPB
The LM117 and LM317-N series of adjustable 3-pin
positive voltage regulators are capable of supplying in
excess of 1.5 A over a 1.25-V to 37-V output range
and a wide temperature range. They are
exceptionally easy to use and require only two
external resistors to set the output voltage. Further,
both line and load regulation are better than standard
fixed regulators.
The LM117 and LM317-N offer full overload
protection such as current limit, thermal overload
protection and safe area protection. All overload
protection circuitry remains fully functional even if the
adjustment terminal is disconnected.
Typically, no capacitors are needed unless the device
is situated more than 6 inches from the input filter
capacitors, in which case an input bypass is needed.
An optional output capacitor can be added to improve
transient response. The adjustment terminal can be
bypassed to achieve very high ripple rejection ratios
that are difficult to achieve with standard 3-terminal
regulators.
Because the regulator is floating and detects only the
input-to-output differential voltage, supplies of several
hundred volts can be regulated as long as the
maximum input-to-output differential is not exceeded.
That is, avoid short-circuiting the output.
By connecting a fixed resistor between the
adjustment pin and output, the LM117 and LM317-N
can be also used as a precision current regulator.
Supplies with electronic shutdown can be achieved
by clamping the adjustment terminal to ground, which
programs the output to 1.25 V where most loads draw
little current.
LM318M
The LM118 series are precision high speed ? 15 MHz Small Signal Bandwidth
operational amplifiers designed for applications
? Ensured 50V/?s Slew Rate requiring wide bandwidth and high slew rate. They
? Maximum Bias Current of 250 nA feature a factor of ten increase in speed over general
purpose devices without sacrificing DC performance. ? Operates from Supplies of ?5V to ?20V
? Internal Frequency Compensation The LM118 series has internal unity gain frequency
compensation. This considerably simplifies its ? Input and Output Overload Protected
application since no external components are
? Pin Compatible with General Purpose Op necessary for operation. However, unlike most
Amps internally compensated amplifiers, external frequency
compensation may be added for optimum
performance. For inverting applications, feedforward
compensation will boost the slew rate to over
150V/?s and almost double the bandwidth.
Overcompensation can be used with the amplifier for
greater stability when maximum bandwidth is not
needed. Further, a single capacitor can be added to
reduce the 0.1% settling time to under 1 ?s.
The high speed and fast settling time of these op
amps make them useful in A/D converters, oscillators,
active filters, sample and hold circuits, or general
purpose amplifiers. These devices are easy to apply
and offer an order of magnitude better AC
performance than industry standards such as the
LM709.
The LM218-N is identical to the LM118 except that
the LM218-N has its performance specified over a
?25?C to 85?C temperature range. The LM318-N is
specified from 0?C to 70?C.
LM318N/NOPB
The LM118 series are precision high speed ? 15 MHz Small Signal Bandwidth
operational amplifiers designed for applications
? Ensured 50V/?s Slew Rate requiring wide bandwidth and high slew rate. They
? Maximum Bias Current of 250 nA feature a factor of ten increase in speed over general
purpose devices without sacrificing DC performance. ? Operates from Supplies of ?5V to ?20V
? Internal Frequency Compensation The LM118 series has internal unity gain frequency
compensation. This considerably simplifies its ? Input and Output Overload Protected
application since no external components are
? Pin Compatible with General Purpose Op necessary for operation. However, unlike most
Amps internally compensated amplifiers, external frequency
compensation may be added for optimum
performance. For inverting applications, feedforward
compensation will boost the slew rate to over
150V/?s and almost double the bandwidth.
Overcompensation can be used with the amplifier for
greater stability when maximum bandwidth is not
needed. Further, a single capacitor can be added to
reduce the 0.1% settling time to under 1 ?s.
The high speed and fast settling time of these op
amps make them useful in A/D converters, oscillators,
active filters, sample and hold circuits, or general
purpose amplifiers. These devices are easy to apply
and offer an order of magnitude better AC
performance than industry standards such as the
LM709.
The LM218-N is identical to the LM118 except that
the LM218-N has its performance specified over a
?25?C to 85?C temperature range. The LM318-N is
specified from 0?C to 70?C.
LM318P
The LM118, LM218, and LM318 are precision,
fast operational amplifiers designed for
applications requiring wide bandwidth and high
slew rate. They feature a factor-of-ten increase in
speed over general-purpose devices without
sacrificing dc performance.
These operational amplifiers have internal
unity-gain frequency compensation. This
considerably simplifies their application because
no external components are necessary for
operation. However, unlike most internally
compensated amplifiers, external frequency
compensation may be added for optimum
performance. For inverting applications,
feed-forward compensation boosts the slew rate
to over 150 V/?s and almost double the
bandwidth. Overcompensation can be used with
the amplifier for greater stability when maximum
bandwidth is not needed. Further, a single
capacitor can be added to reduce the settling time
for 0.1% error band to under 1 ?s.
The high speed and fast settling time of these operational amplifiers make them useful in A/D converters,
oscillators, active filters, sample-and-hold circuits, and general-purpose amplifiers.
LM318PSR
The LM118, LM218, and LM318 are precision,
fast operational amplifiers designed for
applications requiring wide bandwidth and high
slew rate. They feature a factor-of-ten increase in
speed over general-purpose devices without
sacrificing dc performance.
These operational amplifiers have internal
unity-gain frequency compensation. This
considerably simplifies their application because
no external components are necessary for
operation. However, unlike most internally
compensated amplifiers, external frequency
compensation may be added for optimum
performance. For inverting applications,
feed-forward compensation boosts the slew rate
to over 150 V/?s and almost double the
bandwidth. Overcompensation can be used with
the amplifier for greater stability when maximum
bandwidth is not needed. Further, a single
capacitor can be added to reduce the settling time
for 0.1% error band to under 1 ?s.
The high speed and fast settling time of these operational amplifiers make them useful in A/D converters,
oscillators, active filters, sample-and-hold circuits, and general-purpose amplifiers.
LM319DT
FEATURES
? Two independent comparators
? Supply voltage: 5 V to ?15 V
? Typically 80 ns response time at ?15 V
? Minimum fan-out of two each side
? Maximum input current of 1 ?A over the
operating temperature range
? Inputs and outputs can be isolated from system
ground
? High common-mode slew rate
Description
These products are precision high-speed dual
comparators designed to operate over a wide
range of supply voltages down to a single 5 V
logic supply and ground. They feature low input
currents and high gains.
The open collector of the output stage makes
them compatible with transistor-transistor logic
(TTL) as well as capable of driving lamps and
relays at currents up to 25 mA.
Although designed primarily for applications
requiring operation from digital logic supplies,
these comparators are fully specified for power
supplies up to ?15 V.
They feature faster response times than the
LM111 at the expense of higher current
consumption. However, the high speed, wide
operating voltage range and low package count
make the LM119, LM219, and LM319 much more
versatile.
LM323K STEEL/NOPB
The LM123 is a three-terminal positive regulator with effects of input voltage, load currents, ambient
a preset 5V output and a load driving capability of 3 temperature, and power dissipation ensure that the
amps. New circuit design and processing techniques LM123 will perform satisfactorily as a system
are used to provide the high output current without element.
sacrificing the regulation characteristics of lower
current devices. For applications requiring other voltages, see LM150
series adjustable regulator data sheet.
The LM323A offers improved precision over the
standard LM323-N. Parameters with tightened Operation is specified over the junction temperature
specifications include output voltage tolerance, line range ?55?C to 150?C for LM123, ?40?C to 125?C
regulation, and load regulation.
The 3 amp regulator is virtually blowout proof.
Current limiting, power limiting, and thermal shutdown
2? Ensured 1% Initial Accuracy (A Version) provide the same high level of reliability obtained with
? 3 Amp Output Current these techniques in the LM109 1 amp regulator.
? Internal Current and Thermal Limiting No external components are required for operation of
? 0.01? Typical Output Impedance the LM123. If the device is more than 4 inches from
? 7.5V Minimum Input Voltage the filter capacitor, however, a 1 ?F solid tantalum
capacitor should be used on the input. A 0.1 ?F or
? 30W Power Dissipation larger capacitor may be used on the output to reduce
? P
Product Enhancement tested load transient spikes created by fast switching digital
logic, or to swamp out stray load capacitance.
DESCRIPTION An overall worst case specification for the combined
The LM123 is a three-terminal positive regulator with effects of input voltage, load currents, ambient
a preset 5V output and a load driving capability of 3 temperature, and power dissipation ensure that the
amps. New circuit design and processing techniques LM123 will perform satisfactorily as a system
are used to provide the high output current without element.
sacrificing the regulation characteristics of lower
current devices. For applications requiring other voltages, see LM150
series adjustable regulator data sheet.
The LM323A offers improved precision over the
standard LM323-N. Parameters with tightened Operation is specified over the junction temperature
specifications include output voltage tolerance, line range ?55?C to 150?C for LM123, ?40?C to 125?C
regulation, and load regulation. for LM323A, and 0?C to 125?C for LM323-N. A
hermetic TO-3 package is used for high reliability and
low thermal resistance.
LM324DR2G
The LM324 series are low?cost, quad operational amplifiers with
true differential inputs. They have several distinct advantages over
standard operational amplifier types in single supply applications. The
quad amplifier can operate at supply voltages as low as 3.0 V or as
high as 32 V with quiescent currents about one?fifth of those
associated with the MC1741 (on a per amplifier basis). The common
mode input range includes the negative supply, thereby eliminating the
necessity for external biasing components in many applications. The
output voltage range also includes the negative power supply voltage.
Features
? Short Circuited Protected Outputs
? True Differential Input Stage
? Single Supply Operation: 3.0 V to 32 V
? Low Input Bias Currents: 100 nA Maximum (LM324A)
? Four Amplifiers Per Package
? Internally Compensated
? Common Mode Range Extends to Negative Supply
? Industry Standard Pinouts
? ESD Clamps on the Inputs Increase Ruggedness without Affecting
Device Operation
? NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC?Q100
Qualified and PPAP Capable
? These Devices are Pb?Free, Halogen Free/BFR Free and are RoHS
Compliant
LM324DT
Features
? Wide gain bandwidth: 1.3 MHz
? Input common mode voltage range includes ground
? Large voltage gain: 100 dB
? Very low supply current/amplifier: 375 ?A
? Low input bias current: 20 nA
? Low input voltage: 3 mV max.
? Low input offset current: 2 nA
? Wide power supply range:
? Single supply: 3 V to 30 V
? Dual supplies: ?1.5 V to ?15 V
Description
The LM124, LM224x and LM324x consist of four independent, high gain operational
amplifiers with frequency compensation implemented internally. They operate from a
single power supply over a wide range of voltages.
Operation from split power supplies is also possible and the low-power supply current
drain is independent of the magnitude of the power supply voltage.
LM324PT
Features
? Wide gain bandwidth: 1.3 MHz
? Input common mode voltage range includes ground
? Large voltage gain: 100 dB
? Very low supply current/amplifier: 375 ?A
? Low input bias current: 20 nA
? Low input voltage: 3 mV max.
? Low input offset current: 2 nA
? Wide power supply range:
? Single supply: 3 V to 30 V
? Dual supplies: ?1.5 V to ?15 V
Description
The LM124, LM224x and LM324x consist of four independent, high gain operational
amplifiers with frequency compensation implemented internally. They operate from a
single power supply over a wide range of voltages.
Operation from split power supplies is also possible and the low-power supply current
drain is independent of the magnitude of the power supply voltage.
