MC34262 Power Factor Controller IC DIP-8 Package
MCP23017 16-Bit Input/Output Expander with I2C Interface IC DIP-28 Package
The MCP23017 device family provides 16-bit, general purpose parallel I/O expansion for I2C bus or SPI applications. The two devices differ only in the serial interface:?MCP23017 ? I2C interface??The MCP23X17 consists of multiple 8-bit configuration registers for input, output and polarity selection.
MCP23S17 16-Bit Input/Output Expander with I2C Interface IC DIP-18 Package
The MCP23S17 device family provides 16-bit, general purpose parallel I/O expansion for I2C bus or SPI applications. The two devices differ only in the serial interface:?MCP23S17 ? SPI interface??The MCP23X17 consists of multiple 8-bit configuration registers for input, output and polarity selection.
MCP2510 CAN Controller Interface IC DIP-18 Package
The Microchip Technology Inc. MCP2510 is a Full Controller Area Network (CAN) protocol controller implementing CAN specification V2.0 A/B. It supports CAN 1.2, CAN 2.0A, CAN 2.0B Passive, and CAN 2.0B Active versions of the protocol, and is capable of transmitting and receiving standard and extended messages.
MCP2515 CAN Controller Interface IC DIP-18 Package
MCP2551 CAN Transceiver IC DIP-8 Package
The MCP2551 is a high-speed CAN. fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The MCP2551 device provides differential transmit and receive capability for the CAN protocol controller, and is fully compatible with the ISO-11898 standard, including 24V requirements.
MT8870
The MT8870D/MT8870D-1 is a comprehensive DTMF receiver that incorporates both the band split filter and the digital decoder features. For high and low group filters, switched capacitor techniques are used; for decoding, digital counting techniques are used to identify and decode all 16 DTMF tone-pairs into a 4-bit code. The on-chip supply of a differential input amplifier, clock oscillator, and latched three-state bus interface reduces the number of external components.
PCF85163D
Nearly any Liquid Crystal Display (LCD)1 with modest multiplex rates may be interfaced with the PCF85162 peripheral device. Any static or multiplexed LCD with up to four backplanes and up to 32 segments can have its driving signals generated by this device. For bigger LCD applications, it is simply cascaded. The two-line bidirectional I2 C-bus is used by the PCF85162 for communication with the majority of microcontrollers. A display RAM with auto-incremented addressing, hardware sub addressing, and display memory switching (static and duplex drive modes) all reduce communication overheads.
Features
LCD controller and driver on a single chip
Selectable display bias configuration: static, 12, or 13; Internal LCD bias generation with voltage-follower buffers; Selectable backplane drive configuration: static, 2, 3, or 4 backplane multiplexing; 32 segment drives:
Up to 8 14-segment alphanumeric characters, up to 16 7-segment numeric characters, and up to 128 components of any image
For storing display data, use 32 bits of RAM.
Flexible flashing modes; switching between display memory banks in static and duplex driving modes; and independent supply for LCD and logic voltage
Broad power supply range: 1.8 to 5.5 volts
SG3524 Regulating Pulse Width Modulator IC DIP-16 Package
SG3524 incorporate all the functions required in the construction of a regulating power supply, inverter, or switching regulator on a single chip. It can be used as the control element for high-power-output applications.SG3524 was designed for switching regulators of either polarity, transformer-coupled dc-to-dc converters, transformerless voltage doublers, and polarity-converter applications employing fixed-frequency, pulse-width modulation (PWM) techniques.
SG3525 Pulse Width Modulation Controller IC DIP-16 Package
SGTL5000XNLA3
Features of SGTL5000XNLA3
Analog inputs
? Stereo LINEIN - External analogue input support
? Stereo LINEIN - Low power codec bypass
? MIC bias was offered
? Adjustable MIC gain
? ADC: -73 dB THD+N (VDDA = 1.8 V) and 85 dB SNR (-60 dB input).
Analog outputs
? Cap less design for HP output
? HP Output: 62.5 mW peak, sine wave @ 1.02 kHz, 16-ohm load at 3.3 V
? HP Output: -80 dB THD+N (VDDA = 1.8 V, 16 load, DAC to headphone) and 100 dB SNR (-60 dB input).
? LINEOUT: -85 dB THD+N (VDDIO = 3.3 V) and 100 dB SNR (-60 dB input).
I/O in digital form of SGTL5000XNLA3
? I2S port for Application Processor Integrated Digital Processing route
? Graphic equaliser clocking/control, NXP surround, NXP bass, and tone control
? PLL provides for the input of system clocks ranging from 8.0 MHz to 27 MHz; standard audio clocks are derived from PLL.
Power Sources of SGTL5000XNLA3
? Created to function between 1.62 and 3.6 volts
TLC5940 16 Channel PWM Control LED Driver IC DIP-28 Package
The TLC5940 is a 16-channel, constant-current sink LED driver. Each channel has an individually adjustable 4096-step grayscale PWM brightness control and a 64-step, constant-current sink (dot correction). The dot correction adjusts the brightness variations between LED channels and other LED drivers.
