Showing 13–16 of 16 results

M24128-DRDW8TP/K

54.00
Features? of M24128-DRD
  • Support for all I2C bus modes? 1 MHz/ 400 kHz/ 100 kHz
  • Memory bank- An EEPROM with 128 Kbits (16 Kbytes)
  • Page Size in Bytes: 64
  • In addition Make a locked page.
  • Wider range of temperatures and voltages?40 to 105 degrees Celsius; 1.7 to 5.5 volts
  • Schmitt trigger inputs are used to filter noise.
  • Cycle time for short writes- Byte Write in 4 milliseconds- Page Write in 4 milliseconds
  • Express cycling stamina. -4,000,000 Write Cycles at 25 ?C, - 1,2,000,000 Write cycles at 85 ?C & ? 900 k Cycles of writing at 105 ?C
  • Data storage- at 105 ?C for more than 50 years., 200 yr at 55 ?C
  • ESD Defense (Human Body Model)? 4000 V
  • Packing is- Halogen-free and RoHS compliant
Characteristics of M24128-DRD
  • SMD/SMT mounting style
  • Case/Package: TSSOP-8
  • Interface types: I2C and 2-Wire
  • Size of Memory: 128 kbit
  • Arrangement: 16 k x 8
  • Minimum Supply Voltage: 1.7 V
  • Maximum Supply Voltage: 5.5 V
  • 40 C for the minimum operating temperature
  • 105 C is the maximum operating temperature.
  • 1 MHz is the maximum clock frequency.
  • Time to Access: 450 ns
  • Retention of Data: 200 Years
  • Maximum Supply Current: 2 mA
  • The M24128-DRD series
  • mandatory requirement: AEC-Q100
  • Packaging: Cut Tape and Reel
  • Maximum Active Read Current: 2 mA
  • STMicroelectronics is a brand.
  • 2 mA is the operating supply current.
  • Voltage Range for Operating Supply: 1.8 to 5.5 V
  • Type of Product: EEPROM
 

M25P40-VMN6TPB

120.00
Features of M25P40-VMN6TPB?
  • ?4 Mbit of Flash memory
  • ?2.3 V to 3.6 V single supply voltage
  • ?SPI bus compatible serial interface
  • ?75 MHz clock rate (maximum)
  • ?Page Program (up to 256 bytes) in 0.8 ms (typical)
  • ?Sector Erase (512 Kbit) in 0.6 s (typical)
  • ?Bulk Erase (4 Mbit) in 4.5 s (typical)
  • ?Deep Power-down mode 1 ?A (typical)
  • ?Hardware Write Protection: protected area size defined by three non-volatile bits (BP0, BP1 and BP2)
  • ?Electronic signatures ? JEDEC standard two-byte signature (2013h) ? Unique ID code (UID) with 16 bytes read only, available upon customer request ? RES instruction, one-byte, signature (12h), for backward compatibility
  • ?Packages ? RoHS compliant
  • ?Automotive grade parts available
Characteristics
  • Memory Size -
  • Supply Voltage - Min: 2.3 V  
  • Supply Voltage - Max: 3.6 V
  • Active Read Current - Max: 8 mA
  • Interface Type: SPI
  • Maximum Clock Frequency: 75 MHz
  • Organisation: 512 k x 8
  • Data Bus Width: 8 bit
  • Timing Type: Synchronous
  • Minimum Operating Temperature: - 40 C
  • Maximum Operating Temperature: + 85 C
  • Packaging: Reel / Cut Tape
  • Memory Type: NOR
  • Product Type: NOR Flash
  • Speed: 75 MHz

M29W800FB70N3F TR 3V, Parallel NOR Flash

224.00
NOR Flash 8Mb(x8/x16), 3V, Parallel NOR Flash, Bottom Boot, Automotive, 48TSOP, T&R

W25Q16JV-SSIQ

41.00
Features of W25Q16JVSSIQ
  • SpiFlash Memories' New Family - 16M-bit/ 2M-byte W25Q16JV - Common SPI: CLK, /CS, DI, and DO - CLK, /CS, IO0, IO1 and Dual SPI - CLK, /CS, IO0, IO1, IO2, IO3 for Quad SPI. - Hardware and Software Reset
  • Best Serial Flash Performance - Single, Dual, and Quad SPI clocks at 133 MHz - Dual/Quad SPI equal to 266/532MHz - Continuous data transfer rate of 66 MB/S - No fewer than 100K Program-Erase cycles per sector - Retention of data for more than 20 years
  • A productive "Continuous Read"   - Constant Read with 8/16/32/64-Byte Wrap - Address memory with as few as 8 clocks - Facilitates real XIP (execute in place) operation - Performs better than X16 Parallel Flash  
  • Wide temperature range, low power - Single 2.7 to 3.6 volt supply - Operating range: -40 to +85 ?C. - Operating temperature range: -40 to +105 ?C. - Power-down, 1A.
  • 4KB sectors and flexible architecture - 4K/32K/64K-Byte Uniform Sector/Block Erase - Programmable pages can hold up to 256 bytes. - Delete/Suspend/Resume Program
  • Features of Advanced Security - Write-Protect in Software and Hardware - Lock-Down Power Supply and - Extraordinary OTP security - Protection for the top/bottom and complement arrays - Protection for individual blocks and sectors - Each device has a 64-Bit unique ID. - Register for Discoverable Parameters (SFDP) - OTP locks on 3X256-Byte Security Registers - Bits in the Volatile & Non-Volatile Status Register  
  • Effective Packaging for Space - 8-pin SOIC 150/208 mils - USON 8-pad 2X3mm/4X3mm - XSON 8-pad 4x4-mm - WSON 8-pad 6x5-mm ? 8-ball WLCSP - For KGD and additional alternatives, contact Winbond