MC33262 Power Factor Controller IC DIP-8 Package
MC33883HEG
Features Of? MC33883HEG
? The operating voltage for VCC is between 5.5 and 55 volts.
? The operational voltage of VCC2 is between 5.5 and 28 volts.
? Compatible I/O for LSTTL and CMOS
? Peak gate driver current of 1 A
? High side charge pump built-in
? Lockout due to undervoltage (UVLO)
? Voltage overload lockout (OVLO)
? 10A Sleep mode with global enable
? Allows for PWM at up to 100 kHz
? AEC-Q100 compliant qualification
Applications Of MC33883HEG
? Automotive: 12 V to high-voltage battery packs
? E-bikes, e-scooters
? Energy Storage Systems (ESS)
? Uninterruptible Power Supply (UPS)
? Battery junction box
MC3403 Quad Low-Power Operational Amplifier IC DIP-14
The ?MC3403 are quadruple operational amplifiers similar in performance to the ?A741, but with several distinct advantages. They are designed to operate from a single supply over a range of voltages from 3 V to 36 V. Operation from split supplies also is possible, provided the difference between the two supplies is 3 V to 36 V. The common-mode input range includes the negative supply. Output range is from the negative supply to VCC ? 1.5 V. Quiescent supply currents are less than one-half those of the ?A741. The MC3403 is characterized for operation from 0?C.
MC34063 DC TO DC Converter IC DIP-8 Package
The MC34063A Series is a monolithic control circuit containing the primary functions required for DC?to?DC converters. These devices consist of an internal temperature compensated reference, comparator, controlled duty cycle oscillator with an active current limit circuit, driver and high current output switch.
MC34151 High Speed Dual MOSFET Driver IC DIP-8 Package
MC34262 Power Factor Controller IC DIP-8 Package
MC74HC574AN
Features of MC74HC574AN
? Output Drive Capability: 15 LSTTL Loads
? Outputs Directly Interface to CMOS, NMOS, and TTL
? Operating Voltage Range: 2.0 to 6.0 V
? Low Input Current: 1.0 A
? In Compliance with the Requirements Defined by JEDEC Standard
No. 7 A
? Chip Complexity: 266 FETs or 66.5 Equivalent Gates
? NLV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC?Q100
Qualified and PPAP Capable
? These Devices are Pb?Free and are RoHS Compliant
MCP2200 USB 2.0 to UART Protocol Converter with GPIO
MCP23017 16-Bit Input/Output Expander with I2C Interface IC DIP-28 Package
The MCP23017 device family provides 16-bit, general purpose parallel I/O expansion for I2C bus or SPI applications. The two devices differ only in the serial interface:?MCP23017 ? I2C interface??The MCP23X17 consists of multiple 8-bit configuration registers for input, output and polarity selection.
MCP23S17 16-Bit Input/Output Expander with I2C Interface IC DIP-18 Package
The MCP23S17 device family provides 16-bit, general purpose parallel I/O expansion for I2C bus or SPI applications. The two devices differ only in the serial interface:?MCP23S17 ? SPI interface??The MCP23X17 consists of multiple 8-bit configuration registers for input, output and polarity selection.
MCP2510 CAN Controller
The MCP2510 provides immediate CAN support across the entire breadth of Microchip?s 100 PICmicro? microcontrollers, providing a seamless migration path and maximum design flexibility for CAN designs. The?MCP2510 CAN Controller?contains on-board features, such as interrupt capability, message masking and filtering, message prioritization, multi-purpose I/O pins, and multiple transmit/receive buffers which significantly offload the microcontroller overhead required to handle CAN message traffic. Applications for the MCP2510 include motor control, smoke detectors, CO detectors, sensors, meters, automotive electronics, climate control and instrument clusters.
MCP2510 CAN Controller Interface IC DIP-18 Package
The Microchip Technology Inc. MCP2510 is a Full Controller Area Network (CAN) protocol controller implementing CAN specification V2.0 A/B. It supports CAN 1.2, CAN 2.0A, CAN 2.0B Passive, and CAN 2.0B Active versions of the protocol, and is capable of transmitting and receiving standard and extended messages.
