TLP523
The TLP5231 is a 2.5 A dual-output IGBT gate pre-drive photocoupler including highly integrated multi-functional
IC that is housed in SO16L package having a long creepage and clearance. This photocoupler is suitable as a predriver to driver power devices via external p- and n- channel MOSFET as buffers.
The smart gate driver photocoupler includes functions of IGBT/power MOSFET desaturation detection, isolated
fault status feedback, configurable soft gate turn-off, and under voltage lockout (UVLO).
The TLP5231 consists of two infrared light-emitting diodes (LEDs) and two high-gain and high-speed lightreceiving IC chips. Thereby, they realize the control of output current and the feedback function of the fault signal
while keeping a insulation between a primary side and secondary side electrically.
TLP701F(TP,F)
TLP701F consists of a GaA?As light-emitting diode and an integrated photodetector. This unit comes in a 6-lead SDIP package. The TLP701F is half the size of an 8-pin DIP and meets international safety standards for reinforced insulation class. As a result, the mounting area in equipment requiring safety standard certification can be reduced. The TLP701F is appropriate for gate driving IGBTs or power MOSFETs. The TLP701F, in particular, is capable of "direct" gate driving of low-power IGBTs.
Absolute Maximum ratings and electrical characteristics are the same as The TLP701 technical data sheets.
? Peak output current : ?0.6 A (max)
? Guaranteed performance over temperature: ?40 to 100?C
? Supply current : 2 mA (max)
? Power supply voltage : 10 to 30 V
? Threshold input current : IFLH = 5 mA (max)
? Switching time (tpLH/tpHL) : 700 ns (max)
? Common mode transient immunity : ?10 kV/?s (min)
? Isolation voltage : 5000 Vrms (min)
TLV2324IDR
The TLV232x operational amplifiers are in a family
of devices that has been specifically designed for
use in low-voltage single-supply applications.
This amplifier is especially well suited to
ultra-low-power systems that require devices to
consume the absolute minimum of supply
currents. Each amplifier is fully functional down to
a minimum supply voltage of 2 V, is fully
characterized, tested, and specified at both 3-V
and 5-V power supplies. The common-mode input
voltage range includes the negative rail and
extends to within 1 V of the positive rail.
TLV2370ID
The TLV237x single-supply operational amplifiers
provide rail-to-rail input and output capability. The
TLV237x takes the minimum operating supply voltage
down to 2.7 V over the extended industrial
temperature range while adding the rail-to-rail output
swing feature. The TLV237x also provides 3-MHz
bandwidth from only 550 ?A. The maximum
recommended supply voltage is 16 V, which allows
the devices to be operated from (?8-V supplies down
to ?1.35 V) a variety of rechargeable cells
TNY254GN-TL
Lowest Cost, Low Power Switcher Solution
? Lower cost than RCC, discrete PWM and other integrated/hybrid solutions
? Cost effective replacement for bulky linear adapters
? Lowest component count
? Simple ON/OFF control ? no loop compensation devices
? No bias winding ? simpler, lower cost transformer
? Allows simple RC type EMI filter for up to 2 W from
universal input or 4 W from 115 VAC input
TNY264GN-TL
TinySwitch?-II integrates a 700 V power MOSFET, oscillator,
high voltage switched current source, current limit and thermal
shutdown circuitry onto a monolithic device. The start-up and
operating power are derived directly from the voltage on the
DRAIN pin, eliminating the need for a bias winding and associated
circuitry. In addition, the TinySwitch-II devices incorporate
auto-restart, line undervoltage sense, and frequency jittering. An
innovative design minimizes audio frequency components in the
simple ON/OFF control scheme to practically eliminate audible
noise with standard taped/varnished transformer construction.
