Showing 13–24 of 44 results

IN5378B(100V)

15.00
a silicon semiconductor device that permits current to flow in either a forward or reverse direction. The diode consists of a special, heavily doped p-n junction, designed to conduct in the reverse direction when a certain specified voltage is reached. The Zener diode has a well-defined reverse-breakdown voltage, at which it starts conducting current, and continues operating continuously in the reverse-bias mode without getting damaged. Additionally, the voltage drop across the diode remains constant over a wide range of voltages, a feature that makes Zener diodes suitable for use in voltage regulation

IRG4PC40U

180.00
IGBT - 600 V 40 A 160 W Through Hole TO-247AC

JHD 16Ɨ2 Character LCD Display

170.00
  1. Modelļ¼š JHD659 Y/YG
  2. Displayļ¼š 16Ɨ2 character
  3. Outlineļ¼š 80.0Ɨ36.0x14.5
  4. VAļ¼š 64.5Ɨ14.5
  5. Controllerļ¼š SPLC780D
  6. Characterļ¼š 2.95Ɨ4.35
  7. Driverļ¼š 1/16

LM709CN

The LM70 is a temperature sensor, Delta-Sigma ā€¢ Shutdown Mode Conserves Power Between analog-to-digital converter with an SPI and Temperature Reading MICROWIRE compatible interface available in WSON ā€¢ SPI and MICROWIRE Bus Interface and VSSOP 8-pin packages. The host can query the ā€¢ VSSOP-8 and WSON-8 Packages Save Space LM70 at any time to read temperature. A shutdown mode decreases power consumption to less than 10 ā€¢ UL Recognized Component ĀµA. This mode is useful in systems where low average power consumption is critical. APPLICATIONS The LM70 has 10-bit plus sign temperature resolution ā€¢ System Thermal Management (0.25Ā°C per LSB) while operating over a temperature ā€¢ Personal Computers range of āˆ’55Ā°C to 150Ā°C. ā€¢ Disk Drives The LM70's 2.65V to 5.5V supply voltage range, low ā€¢ Office Electronics supply current and simple SPI interface make it ideal for a wide range of applications. These include ā€¢ Electronic Test Equipment thermal management and protection applications in hard disk drives, printers, electronic test equipment, KEY SPECIFICATIONS and office electronics

M27C512-12C1

The M27C512 is a 512 Kbit EPROM offered in the two ranges UV (ultra violet erase) and OTP (one time programmable). It is ideally suited for applications where fast turn-around and pattern experimentation are important requirements and is organized as 65536 by 8 bits. The FDIP28W (window ceramic frit-seal package) has transparent lid which allows the user to expose the chip to ultraviolet light to erase the bit pattern. A new pattern can then be written to the device by following the programming procedure.

MS51XB9AE

50.00
MS51XB9AE is embedded with based on 1T 8051-based CMOS microcontroller, runs up to 24 MHz, features 16 K bytes flash, 1 K bytes SRAM, and 4 K bytes loader ROM for the ISP, also equipped with rich peripherals: 2 sets of UART; 1 set of IĀ²C, and 1 set of SPI, 18 GPIO, 8 channels of 12-bit ADC, Watchdog Timer, Window Watchdog Timer andĀ 6*16-bit PWM channel, package is available in QFN20.