1.5KE24CA (pack of 10)

The 1.5SMC series was intended to safeguard critical electrical items against voltage transients caused by lightning and other transient voltage phenomena Features • 1500W peak pulse power capability at 10/1000s waveform, repetition rate (duty cycles):0.01% • Excellent clamping capability • Low incremental surge resistance • Typical IR less than 1A when VBR min>12V • Excellent clamping capability • Low incremental surge resistance • Typical IR less than 1A when VBR min>12V • For surface mounted applications to optimise board space • Low profile package • Built-in strain relief • Typical failure mode is short from over-specified voltage or current • Whisker test is performed in accordance with JEDEC JESD201A table 4a and 4c • IEC 61000-4-2 ESD 30kV (Air), 30kV (Contact) Applications TVS devices are essential to safeguard I/O interfaces, VCC buses, and other susceptible circuits in telecom, computer, and industrial applications.

The ADR380 and ADR381 are precise band gap voltage references with great accuracy, consistency, and low power consumption in a small footprint. Temperature drift curvature correction procedures that are patented reduce the non - linearity of the voltage change with heat. They are suited for 3 V to 5 V battery-powered applications because to their wide working range and low power consumption. The ADR380 and ADR381 are low dropout voltage (LDV) micropower devices that deliver a consistent output voltage from suppliers as low as 300 mV above the output voltage. They are specified for the industrial temperature range (40°C to 85°C). The ADR380/ADR381 are available in the small three-lead SOT-23 package. FEATURES Initial precision: 5 mV/maximum 6 mV Initial mistake in accuracy: 0.24 percent/ 0.24 percent Low TCVOUT: maximum 25 ppm/°C 70 ppm/mA load control 25 ppm/V line regulation extensive operational ranges 2.4 V to 18 V for ADR380 2.8 V to 18 V for ADR381 120 A maximum for low power 5-mA high output current Wide temperature range: 40 to 85 degrees Celsius small 3-lead SOT-23 package with conventional pinout APPLICATIONS battery-operated equipment portable medical devices data collection methods Control systems for industrial processes a set of hard discs Automotive

ESD Suppressors / TVS Diodes 9.4V Reverse Standoff Voltage, 600W Peak Pulse Power, 38A Peak Pulse Current, Bi-Directional

Features • For surface mounted applications • Low Zener impedance • Low regulation factor • Plastic packaging has an underwriters laboratory flammability classification of 94 V-0. • Standard voltage tolerance is 10%, suffix A is 5%, and high temperature soldering is guaranteed: 260 °C/10 s at terminals • Qualified to AEC-Q101