24C32 32K bit
₹14.00
A 4K x 8 (32K bit) Serial Electrically Erasable PROM is the 24C32. This gadget was created for high-end, low-power uses like data collecting or personal communications. The 24C32 has an input cache with a capacity of eight 8-byte pages, or 64 bytes, allowing quick write loads. Additionally, it has a fixed 4K-bit block of ultra-high endurance memory for regularly changing data. Up to the 32K border, the 24C32 may read both randomly and sequentially. Up to eight 24C32 devices can share a bus with functional address lines, providing a maximum address space of 256K bits. This device is perfect for moderate POWER??non-volatile code and data applications thanks to advanced CMOS technology. The typical 8-pin plastic DIP and 8-pin surface mount SOIC packaging for the 24C32 are also available.
Features:-
? Operating voltage range: 4.5V to 5.5V – Maximum read current: 150 A at 5.5V – Peak write current: 3mA at 5.5V – Typical standby current: 1 A
? I2C compliant, industry-standard two-wire bus protocol with 100 kHz and 400 kHz modes
? Autonomous write cycle (including auto-erase)
? Switchable circuitry for data protection
? High Endurance Block has a guaranteed 10,000,000 Erase/Write cycles. – Guaranteed 1,000,000 E/W cycles for Standard Endurance Block
? Available in 8 byte page or byte modes.
? A 64-byte input cache with 1 page by 8 lines for quick write loads.
? Schmitt trigger with filtered inputs to reduce noise
? Ground bounce elimination by output slope control
? A typical write cycle time, byte or page, of 2 ms
? A single bus may support up to 8 chips and 256K bits of total memory.
? Protection from electrostatic discharge > 4000V
? 200-year data retention
? PDIP/SOIC 8-pin packages
? Variable temperatures Industrial (I): -40?C to +85?C Commercial (C): 0?C to +70?C
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
24LC256-I/SN
Features of? 24LC256-I/SN
? A single supply for use For? 24LC256-I/SN , it drops to 1.7V, whereas 24LC256 devices rise to 2.5V.
? CMOS Low-Power Technology:
Maximum write current is 3 mA. Maximum standby current is 1 A. (I-temp.)
? I2C Compatible, Two-Wire Serial Interface
? Up to eight devices can be cascaded
? Noise-cancelling Schmitt Trigger Inputs
? Ground Bounce is eliminated through output slope control.
? Compatibility with 100 kHz, 400 kHz, and 1 MHz
? Maximum Page Write Time: 5 ms
? Timed Erase/Write Cycle on Your Own
The 64-Byte Page Write Buffer
Equipment Write-Protect
? >4000V ESD Protection
? Over a Million Eraser/Writer Cycles
? >200 years for data retention
Factory programming is accessible for 24LC256-I/SN
24LC256-I/SN is RoHS conformant
25AA320-I/SN
The Microchip Technology Inc. 25AA320/25LC320/25C320 (25XX320*) serial Electrically Erasable PROMs are 32 Kbit. A basic Serial Peripheral Interface (SPI) compliant serial bus is used to access the memory. A clock input (SCK) is required, as well as separate data in (SI) and data out (SO) lines. A Chip Selection (CS) input controls access to the device. The hold pin allows you to suspend communication with the gadget (HOLD). Transitions on the device's inputs will be ignored while it is stopped, excluding Chip Select, enabling the host to service higher priority interrupts.
Features
? CMOS Low-Power Technology:
- Maximum write current: 3 mA
- Typical read current: 500 A
- Typical standby current: 500 nA
? 4096 x 8 Bit Storage
? 32 bytes each page
? Maximum Write Cycle Time: 5 ms
? Erase and write cycles that are self-timed
? Write Block Protection:
- Protect none, 1/4, 1/2, or the entire array.
? Integrated Write Protection:
- Data protection circuitry that is switched on and off
? Latch for write enable
- A write-protection pin
? Read in Sequence
? High dependability:
- Endurance: 1 million E/W cycles
- Data retention: more than 200 years
- ESD protection: more than 4000V
? PDIP, SOIC, and TSSOP packages with 8 pins
? TSSOP Package with 14 Leads
AT24C512-10PU
The AT24C512 provides 524,288 bits of serial electrically erasable and programmable read only memory (EEPROM) organized as 65,536 words of 8 bits each. The device’s cascadable feature allows up to four devices to share a common two-wire bus. The device is optimized for use in many industrial and commercial applications where lowpower and low-voltage operation are essential. The devices are available in spacesaving 8-pin PDIP, 8-lead EIAJ SOIC, 8-lead JEDEC SOIC, 8-lead TSSOP, 8-lead Leadless Array (LAP), and 8-lead SAP packages. In addition, the entire family is available in 2.7V (2.7V to 5.5V) and 1.8V (1.8V to 3.6V) versions.
AT24C512 Datasheet
AT24C512C-SSHD
The AT24C512C functions as a slave device and communicates with a host controller, also known as the bus master, using a straightforward two-wire digital serial interface that is I2C-compatible. On a serial bus, the master initiates and manages all read and write operations to slave devices, and both the master and slave devices are capable of sending and receiving data. Just two signal lines?Serial Clock (SCL) and Serial Data?make up the serial interface (SDA). The bilateral SDA pin is used to receive command and detailed empirical from the master as well as to transmit data back to the master, while the SCL pin is used to accept the clock signal from the master. To reduce the impact of input spikes and bus noise, the SCL and SDA pins each include Schmitt Triggers and inbuilt spike suppression filters. The Most Significant bit (MSb) is always transmitted first when sending commands or data. After eight bits (one byte) of information have been exchanged during bus communication, the receiving device must answer with an Acknowledge (ACK) or No-Acknowledge (NACK) response bit during such a ninth clock cycle (ack/nack clock cycle) produced by the master. As a result, nine clock cycles are needed to send one byte of data. There must be no gaps or interruptions throughout any data transfer operation since there are no spare clock cycles.
AT24C512C-SSHD Datasheet
AT25640B-SSHL-T
The Serial Electrically-Erasable Programmable Read-Only Memory (EEPROM) on the Atmel? AT25320B/640B has 32,768-/65,536-bits and is divided into 4,096/8,192 words with 8 bits each. The device is prepared for usage in a wide range of industrial and commercial settings where moderate and low-voltage functioning are critical requirements. The 8-lead JEDEC SOIC, 8-lead TSSOP, 8-lead UDFN, 8-lead XDFN, and 8-ball VFBGA packages for the AT25320B/640B are available in compact sizes. A 3-wire interface made up of Serial Data Input (SI), Serial Data Output (SO), and Serial Clock is used to access and enable the AT25320B/640B. (SCK). No further erase cycle is necessary before Write since every programming cycle is fully self-timed. Programming one of the four blocks of write security into the status register activates block write protection. For added data security, separate instructions for programme enable and programme disable are given. The WP pin offers hardware data protection to guard against unintentional write attempts to the status register. Any serial communication can be halted using the HOLD pin without having to restart the serial sequence.
HT9200A
The HT9200A/B tone generators are intended for use with C interfaces. aC can direct them to generate 16 dual tones and 8 single tones using the DTMF pin. The HT9200A has a serial mode, but the HT9200B has a selectable serial/parallel mode interface for a variety of applications such as surveillance systems, building automation, navigation system through telephone lines, communication systems, and so on.
M24128-DRDW8TP/K
Features? of M24128-DRD
- Support for all I2C bus modes? 1 MHz/ 400 kHz/ 100 kHz
- Memory bank- An EEPROM with 128 Kbits (16 Kbytes)
- Page Size in Bytes: 64
- In addition Make a locked page.
- Wider range of temperatures and voltages?40 to 105 degrees Celsius; 1.7 to 5.5 volts
- Schmitt trigger inputs are used to filter noise.
- Cycle time for short writes- Byte Write in 4 milliseconds- Page Write in 4 milliseconds
- Express cycling stamina. -4,000,000 Write Cycles at 25 ?C, - 1,2,000,000 Write cycles at 85 ?C & ? 900 k Cycles of writing at 105 ?C
- Data storage- at 105 ?C for more than 50 years., 200 yr at 55 ?C
- ESD Defense (Human Body Model)? 4000 V
- Packing is- Halogen-free and RoHS compliant
- SMD/SMT mounting style
- Case/Package: TSSOP-8
- Interface types: I2C and 2-Wire
- Size of Memory: 128 kbit
- Arrangement: 16 k x 8
- Minimum Supply Voltage: 1.7 V
- Maximum Supply Voltage: 5.5 V
- 40 C for the minimum operating temperature
- 105 C is the maximum operating temperature.
- 1 MHz is the maximum clock frequency.
- Time to Access: 450 ns
- Retention of Data: 200 Years
- Maximum Supply Current: 2 mA
- The M24128-DRD series
- mandatory requirement: AEC-Q100
- Packaging: Cut Tape and Reel
- Maximum Active Read Current: 2 mA
- STMicroelectronics is a brand.
- 2 mA is the operating supply current.
- Voltage Range for Operating Supply: 1.8 to 5.5 V
- Type of Product: EEPROM
M25P40-VMN6TPB
Features of M25P40-VMN6TPB?
- ?4 Mbit of Flash memory
- ?2.3 V to 3.6 V single supply voltage
- ?SPI bus compatible serial interface
- ?75 MHz clock rate (maximum)
- ?Page Program (up to 256 bytes) in 0.8 ms (typical)
- ?Sector Erase (512 Kbit) in 0.6 s (typical)
- ?Bulk Erase (4 Mbit) in 4.5 s (typical)
- ?Deep Power-down mode 1 ?A (typical)
- ?Hardware Write Protection: protected area size defined by three non-volatile bits (BP0, BP1 and BP2)
- ?Electronic signatures ? JEDEC standard two-byte signature (2013h) ? Unique ID code (UID) with 16 bytes read only, available upon customer request ? RES instruction, one-byte, signature (12h), for backward compatibility
- ?Packages ? RoHS compliant
- ?Automotive grade parts available
- Memory Size -
- Supply Voltage - Min: 2.3 V
- Supply Voltage - Max: 3.6 V
- Active Read Current - Max: 8 mA
- Interface Type: SPI
- Maximum Clock Frequency: 75 MHz
- Organisation: 512 k x 8
- Data Bus Width: 8 bit
- Timing Type: Synchronous
- Minimum Operating Temperature: - 40 C
- Maximum Operating Temperature: + 85 C
- Packaging: Reel / Cut Tape
- Memory Type: NOR
- Product Type: NOR Flash
- Speed: 75 MHz
Reviews
There are no reviews yet.