APQ8009-0-504NSP-TR-01-1-AA

The Arm? Cortex?-M0 core with a 32-bit hardware multiplier/divider is the foundation of the NuMicro? M031/M032 series 32-bit microcontroller. It operates between -40?C and 105?C, operates at up to 48/72 MHz, and has a 1.8 3.6 V working voltage and 5 V I/O tolerance. For applications requiring a 1.8 V low-voltage interface connection with increased fast 2 MSPS conversion rate 12-bit ADC, comparators, and up to 24-ch96/144 MHz PWM control, the M031/M032 family offers a solution. For the voltages, power, and sensor readings, it offers quick and accurate data conversion, followed by quick reaction control for the external device. The Arm? Cortex?-M0 core with a 32-bit hardware multiplier/divider is the foundation of the NuMicro? M031/M032 series 32-bit microcontroller. It operates between -40?C and 105?C, operates at up to 48/72 MHz, and has a 1.8 3.6 V working voltage and 5 V I/O tolerance. For applications requiring a 1.8 V low-voltage interface connection with increased fast 2 MSPS conversion rate 12-bit ADC, comparators, and up to 24-ch96/144 MHz PWM control, the M031/M032 family offers a solution. For the voltages, power, and sensor readings, it offers quick and accurate data conversion, followed by quick reaction control for the external device. The NuMicro? M031/M032 family is appropriate for a variety of uses, including: Laser Distance Meter Air Detector/Cleaner Mobile LCD Panel Controller IoT Sensing Device HMI Controller Micro Printer Gaming Keyboard and Mouse WPC Wireless Charger  

Microchip Technology?s MCP2515 is a stand-alone Controller Area Network (CAN) controller that implements the CAN specification, Version 2.0B. It is capable of transmitting and receiving both standard and extended data and remote frames. The MCP2515 has two acceptance masks and six acceptance filters that are used to filter out unwanted messages, thereby reducing the host MCU?s overhead. The MCP2515 interfaces with microcontrollers (MCUs) via an industry standard Serial Peripheral Interface (SPI).

The Microchip Technology Inc. MCP601/1R/2/3/4 family of low-power operational amplifiers (op amps) are offered in single (MCP601), single with Chip Select (CS) (MCP603), dual (MCP602), and quad (MCP604) configurations. These op amps utilize an advanced CMOS technology that provides low bias current, highspeed operation, high open-loop gain, and rail-to-rail output swing. This product offering operates with a single supply voltage that can be as low as 2.7V, while drawing 230 ?A (typical) of quiescent current per amplifier. In addition, the common mode input voltage range goes 0.3V below ground, making these amplifiers ideal for single-supply operation. These devices are appropriate for low power, battery operated circuits due to the low quiescent current, for A/D convert driver amplifiers because of their wide bandwidth or for anti-aliasing filters by virtue of their low input bias current.