The DS75176B is a high speed differential TRI- STATE@bus/line transceiver designed to meet the requirements of EIA standard RS485 with extended common mode range (+12V to ?7V), for multipoint data transmission. In addition, it is compatible with RS-422. The driver and receiver outputs feature TRI-STATE capability, for the driver outputs over the entire common mode range of +12V to ?7V. Bus contention or fault situations that cause excessive power dissipation within the device are handled by a thermal shutdown circuit, which forces the driver outputs into the high impedance state. DC specifications are guaranteed over the O to 700C temperature and 4.75V to 5.25V supply voltage range.
Features:-
Meets EIA Standard RS485 for Multipoint Bus Transmission and is Compatible with RS-422. Small Outline (SOIC) Package Option Available for Minimum Board Space.
22 ns Driver Propagation Delays.
Single +5V supply.
?7V to +12V Bus Common Mode Range Permits Ground Difference Between Devices on the Bus.
Thermal Shutdown Protection.
High Impedance to Bus with Driver in TRI- STATE or with Power Off, Over the Entire Common Mode Range Allows the Unused Devices on the Bus to be Powered Down.
Pin out Compatible with DS3695/A and SN75176A/B.
Combined Impedance of a Driver Output and Receiver Input is Less Than One RS485 Unit Load, Allowing up to 32 Transceivers on the Bus.
70 mV Typical Receiver Hysteresis.
Specifications:-
Parameter Values
Supply Voltage, VCC 7V
Control Input Voltages 7V
Driver Input Voltage 7V
Driver Output Voltages +15V/ ?10V
Receiver Input Voltages (DS75176B) +15V/ ?10V
Receiver Output Voltage 5.5V
Storage Temperature Range ?65?C to +150?C
Related Document:-
DS75176 IC Datasheet
* Product Images are shown for illustrative purposes only and may differ from actual product.
DS75176 RS-422/RS-485 Interface IC DIP-8 Package
₹45.00
The DS75176B is a high speed differential TRI- STATE@bus/line transceiver designed to meet the requirements of EIA standard RS485 with extended common mode range (+12V to ?7V), for multipoint data transmission.
Description
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
BD6221F-E2
Basic Information
Full bridge drivers, or H-bridges, are what are used in brush motor applications. Each IC has an operating voltage range of 6V to 15V and a maximum output current of 2A. The output stage's MOS transistors enable PWM speed control. Motor driver ICs that have been discontinued can be directly replaced thanks to the inbuilt VREF voltage control mechanism. Low-power consumption designs are made possible by these incredibly efficient H-bridge driver ICs.
Features
Built-in Selectable Features Cross-Conduction Prevention Circuit, OCP, OVP, TSD, and UVLO Protection Circuits, One Channel or Two Channels Configuration, VREF Voltage Setting Pin Enables PWM Duty Control, and One or Two Channels Configuration.
Key Particulars
Maximum Output Current: 0.5A, 1.0A, 2.0A;
Output ON-Resistance: 1.5;
PWM Input Frequency Range: 20kHz to 100kHz;
Standby Current: 0A;
Supply Voltage Range: 18V(Max); (Typ)
-40?C to 85?C is the operating temperature range.
Applications
VTR, CD/DVD players, audiovisual gear, optical disc drives, PC add-ons, and OA equipment
CP2102 IC
CP2102 IC USB to UART Bridge provides a complete plug-and-play interface solution that includes royalty-free drivers. This USB 2.0 compliant device includes 0 digital I/O pins and is available in a 5x5 mm ?QFN28 package.
Specifications:-CP2102 IC
| Parameter | Min | Max | Unit |
| Ambient Temperature under Bias TBIAS | -55 | 125 | ?C |
| Storage Temperature TSTG | -65 | 150 | ?C |
| Voltage on VDD with respect to GND VDD | -0.3 | 4.2 | V |
| Maximum Total Current through VDD and GND | - | 500 | mA |
| Maximum Output Current sunk by RST or any I/O pin | - | 100 | mA |
Fan7390MX SMD
The FAN7390 is a monolithic high? and low?side gate?drive IC,
which can drive high speed MOSFETs and IGBTs that operate up to
600 V. It has a buffered output stage with all NMOS transistors
designed for high pulse current driving capability and minimum
cross?conduction.
ON Semiconductor?s high?voltage process and common?mode
noise canceling techniques provide stable operation of the high?side
driver under high dv/dt noise circumstances. An advanced level shift
circuit offers high?side gate driver operation up to VS = ?9.8 V
(typical) for VBS = 15 V
MCP23017 16-Bit Input/Output Expander with I2C Interface IC DIP-28 Package
The MCP23017 device family provides 16-bit, general purpose parallel I/O expansion for I2C bus or SPI applications. The two devices differ only in the serial interface:?MCP23017 ? I2C interface??The MCP23X17 consists of multiple 8-bit configuration registers for input, output and polarity selection.
MCP2551 CAN Transceiver IC DIP-8 Package
The MCP2551 is a high-speed CAN. fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The MCP2551 device provides differential transmit and receive capability for the CAN protocol controller, and is fully compatible with the ISO-11898 standard, including 24V requirements.
