LNK6666E
LNK6666E
LNK6666E
LNK6666E
LNK6666E
Click to enlarge
LNK6666E
LNK6666E
LNK6666E
LNK6666E
LNK6666E
AD7730BNZ
AD7730BNZ ₹1,650.00
Back to products
Placeholder
71M6513H-IGT/F ₹500.00

LNK6666E

₹50.00

LNK6666E Power Integrations LinkSwitch?-HP Off-Line Switcher family of flyback power supply ICs incorporate a primary side regulated (PSR) controller and high-voltage power MOSFET in a single package. The IC family includes devices optimized for constant voltage (CV) operation at power ranges from 9W to 90W. Power Integrations LinkSwitch-HP IC controller features +/-5% CV accuracy, selectable current limit, programmable latching or hysteretic OVP, UVP and OTP, improved overload power compensation over the line, fast AC reset, and programmable shutdown delay time. These devices include a K package and an eSOP-12B low-profile surface-mount package for ultra-slim designs.

Mfr. No: LNK6666E
Mfr.:Power Integrations
Package/Case: eSIP-7C

Description: AC/DC Converters Off-Line Switcher IC PSR LinkSwitch HP
Datasheet: LNK6666E Datasheet (PDF)

475 in stock

Compare
Add to wishlist
SKU: CMPI-0129 Category:
Description

LNK6666E – Functional Description
A LinkSwitch?-HP device monolithically integrates a controller and high-voltage power MOSFET into one package. It has a newly developed analog control scheme, which enables continuous conduction mode (CCM), primary side regulated (PSR) power supplies up to 90 W without the efficiency limitation of DCM or audible noise. It uses an enhanced peak current mode PWM control scheme with the multi-mode operation. The multi-mode control engine uses the error amplifier output signal voltage at the COMPENSATION pin to set the operating peak current and switching frequency to maintain the output voltage in regulation as shown in Figure 5. For COMPENSATION pin voltages lower than VC(MCM) (typ. 1.25 V) the device enters multi-cycle modulation (MCM) with a fixed peak current of 25% of the programmed current limit. Several innovative improvements have been added to the peak current mode control to allow primary-side regulated CCM operation with no instability. The device meets less than 30 mW input power with no-load at Highline (LNK67xx families).

Product Highlights?
EcoSmart?- Energy Efficient
High Design Flexibility for Low System Cost
Extensive Protection Features
Advanced Green Package Options

Typical Applications od LNK6666E
? LCD Monitor and TV
? Adapter
? Appliances
? Embedded power supplies (DVD, set-top box)
? Industrial

LNK6666E also offers extensive built-in features: LNK6666E

  • External current limit selection.
  • Optional programmable shutdown delay time extension.
  • Optional remote On/Off.
  • Optional fast AC reset.
  • Primary-side sensed output overvoltage protection (OVP) .
  • Lost regulation protection during output overload or short-circuit (auto-restart).
  • Internal current limit over line compensation for constant overload power over line.
  • High-voltage bus overvoltage sense (line OV) for extended line surge withstand.
  • High-voltage bus Undervoltage sense (line UV) for brown-in/out protection.
  • Accurate over-temperature protection (OTP).
  • Output OVP/OCP/OTP shutdown type selection (hysteretic/ latching).
  • Optional external latching shutdown input (current threshold)
  • Cycle-by-cycle current limit control.

Specification – LNK6666E

  • Model – LNK6666
  • Type – MOSFET
  • Output Power ? 60w
  • Operating Supply Current ? 1.6mA
  • Switching Frequency ? 120kHZ to 136kHZ
  • Output Current ? 15uA

Package Includes: LNK6666E

1 x LNK6667 High-Power Off-Line Switcher IC

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “LNK6666E”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Compare

LNK304PN IC – Power Integrations – AC-DC Off Line Switcher IC

₹94.00
The LNK304PN is specifically designed to replace all linear and capacitor-fed (cap dropper) non-isolated power supplies in the under 360 mA output current range at equal system cost while offering much higher performance and energy efficiency. LinkSwitch-TN devices integrate a 700 V power MOSFET, oscillator, simple On/Off control scheme, a high-voltage switched current source, frequency jittering, cycle-by-cycle current limit Figure 1. Typical Buck Converter Application (See Application Examples Section ? ?for Other Circuit Configurations).and thermal shutdown circuitry onto a monolithic IC. The start-up and operating power are derived directly from the voltage on the DRAIN pin, eliminating the need for a bias supply and associated circuitry in buck or fly back converters. The fully integrated auto-restart circuit in the LNK304 safely limits output power during fault conditions such as short-circuit or open loop, reducing component count and system-level load protection cost. ?A local supply provided by the IC allows use of a non-safety graded optocoupler acting as a level shifter to further enhance line and load regulation performance in buck and buck-boost converters.
Add to wishlist
Add to cart
Quick view
Compare

TNY266PN IC – Power Integrations Off Line Switcher IC

₹69.00
The TYN266PN integrates ?a 700 V power MOSFET, oscillator, high voltage switched current source, current limit and thermal shutdown circuitry onto a monolithic device. The start-up and operating power are derived directly from the voltage on the DRAIN pin, eliminating the need for a bias winding and associated circuitry. In addition, the Tiny Switch-II devices incorporate auto-restart, line under voltage sense, and frequency jittering. An innovative design minimizes audio frequency components in the simple ON/OFF control scheme to practically eliminate audible noise with standard taped/varnished transformer construction. The fully integrated auto-restart circuit safely limits output power during fault conditions such as output short circuit or open loop, reducing component count and secondary feedback circuitry cost. An optional line sense resistor externally programs a line under voltage threshold, which eliminates power down glitches caused by the slow discharge of input storage capacitors present in applications such as standby supplies. The operating frequency of 132 kHz is jittered to significantly reduce both the quasi-peak and average EMI, minimizing filtering cost.
Add to wishlist
Add to cart
Quick view
Compare

TNY267PN IC – Power Integrations Off Line Switcher IC

₹73.00
The TYN267PN integrates ?a 700 V power MOSFET, oscillator, high voltage switched current source, current limit and thermal shutdown circuitry onto a monolithic device. The start-up and operating power are derived directly from the voltage on the DRAIN pin, eliminating the need for a bias winding and associated circuitry. In addition, the Tiny Switch-II devices incorporate auto-restart, line under voltage sense, and frequency jittering. An innovative design minimizes audio frequency components in the simple ON/OFF control scheme to practically eliminate audible noise with standard taped/varnished transformer construction. The fully integrated auto-restart circuit safely limits output power during fault conditions such as output short circuit or open loop, reducing component count and secondary feedback circuitry cost. An optional line sense resistor externally programs a line under voltage threshold, which eliminates power down glitches caused by the slow discharge of input storage capacitors present in applications such as standby supplies. The operating frequency of 132 kHz is jittered to significantly reduce both the quasi-peak and average EMI, minimizing filtering cost.
Add to wishlist
Add to cart
Quick view
TNY268PN IC
Compare

TNY268PN IC – Power Integrations Off Line Switcher with Low Power IC

₹50.00
TNY268PN IC - Low Power Off-Line Switcher - Power Integrations - DIP-8
The TNY268PN integrates a 700V power MOSFET, oscillator, high voltage switched current source, current limit, and thermal shutdown circuitry onto a monolithic device. The start-up and operating power are derived directly from the voltage on the DRAIN pin, eliminating the need for a bias winding and associated circuitry. In addition, the TNY268PN incorporates auto-restart, line under voltage sense, and frequency jittering. An innovative design minimizes audio frequency components in the simple ON/OFF control scheme to practically eliminate audible noise with standard taped/varnished transformer construction. The fully integrated auto-restart circuit safely limits output power during fault conditions such as output short circuits or open loop, reducing component count and secondary feedback circuitry cost.
Add to wishlist
Add to cart
Quick view
Compare

TNY275PN IC – Power Integrations Off Line Switcher IC

₹74.00
The TNY275PN incorporates a 700 V power MOSFET, oscillator, high voltage switched current source, current limit (user selectable) and thermal shutdown circuitry. The IC family uses an ON/OFF control scheme and offers a design fl exible solution with a low system cost and extended power capability.
Add to wishlist
Add to cart
Quick view
Placeholder
Compare

TNY277PN IC – Power Integrations Off Line Switcher IC

₹73.00
The TNY277PN incorporates a 700 V power MOSFET, oscillator, high voltage switched current source, current limit (user selectable) and thermal shutdown circuitry. The IC family uses an ON/OFF control scheme and offers a design fl exible solution with a low system cost and extended power capability.
Add to wishlist
Add to cart
Quick view
Compare

TOP227YN IC – Power Integrations – Off Line Switcher IC

₹145.00
TOP227YN belongs to TOPSwitch-II Family from the manufacturer "Power Integration". It is three-Terminal Off-Line PWM Switch. Description The second generation TOPSwitch?-II family is more cost effective and provides several enhancements over the first generation TOPSwitch family. The TOPSwitch-II family extends the power range from 100W to 150W for 100/115/ 230 VAC input and from 50W to 90W for 85-265 VAC universal input. This brings TOPSwitch technology advantages to many new applications, i.e. TV, Monitor, Audio amplifiers, etc. Many significant circuit enhancements that reduce the sensitivity to board layout and line transients now make the design even easier. The standard 8L PDIP package option ?reduces cost in lower power, high efficiency applications. The internal lead frame of this package uses six of its pins to transfer heat from the chip directly to the board, eliminating the cost of a heat sink. TOPSwitch incorporates all functions necessary for a switched mode control system into a three terminal monolithic IC: power MOSFET, PWM controller, high voltage start up circuit, loop compensation and fault protection circuitry.
Add to wishlist
Add to cart
Quick view
Compare

TOP246YN IC – Power Integrations – Off Line Switcher IC

₹143.00
TOP246YN belongs to TOPSwitch-GX Family from the manufacturer "Power Integrations". It is with Extended Power, Design Flexiblity, EcoSmart & Integrated Off-line Switcher. TOPSwitch-GX uses the same proven topology as TOPSwitch, cost effectively integrating the high voltage power MOSFET, PWM control, fault protection and other control circuitry onto a single CMOS chip. Many new functions are integrated to reduce system cost and improve design flexibility, performance and energy efficiency. Depending on package type, either 1 or 3 additional pins over the TOPSwitch standard DRAIN, SOURCE and CONTROL terminals allow the following functions: line sensing (OV/UV, line feed-forward/DCMAX reduction), accurate externally set current limit, remote ON/OFF, synchronization to an external lower frequency, and frequency selection (132 kHz/66 kHz). All package types provide the following transparent features: Soft-start, 132 kHz switching frequency (automatically reduced at light load), frequency jittering for lower EMI, wider DCMAX, hysteretic thermal shutdown, and larger creepage packages. In addition, all critical parameters (i.e. current limit, frequency, PWM gain) have tighter temperature and absolute tolerances to simplify design and optimize system cost.
Add to wishlist
Add to cart
Quick view