M25P40
Click to enlarge
M25P40
TPS65951
TPS65951 Power Integration IC (PMIC) ₹1,098.00
Back to products
M24128-DRD
M24128-DRDW8TP/K ₹54.00

M25P40-VMN6TPB

₹120.00

Features of M25P40-VMN6TPB?

  • ?4 Mbit of Flash memory
  • ?2.3 V to 3.6 V single supply voltage
  • ?SPI bus compatible serial interface
  • ?75 MHz clock rate (maximum)
  • ?Page Program (up to 256 bytes) in 0.8 ms (typical)
  • ?Sector Erase (512 Kbit) in 0.6 s (typical)
  • ?Bulk Erase (4 Mbit) in 4.5 s (typical)
  • ?Deep Power-down mode 1 ?A (typical)
  • ?Hardware Write Protection: protected area size defined by three non-volatile bits (BP0, BP1 and BP2)
  • ?Electronic signatures
    ? JEDEC standard two-byte signature (2013h)
    ? Unique ID code (UID) with 16 bytes read only, available upon customer request
    ? RES instruction, one-byte, signature (12h), for backward compatibility
  • ?Packages
    ? RoHS compliant
  • ?Automotive grade parts available

Characteristics

  • Memory Size –
  • Supply Voltage – Min: 2.3 V

     

  • Supply Voltage – Max: 3.6 V
  • Active Read Current – Max: 8 mA
  • Interface Type: SPI
  • Maximum Clock Frequency: 75 MHz
  • Organisation: 512 k x 8
  • Data Bus Width: 8 bit
  • Timing Type: Synchronous
  • Minimum Operating Temperature: – 40 C
  • Maximum Operating Temperature: + 85 C
  • Packaging: Reel / Cut Tape
  • Memory Type: NOR
  • Product Type: NOR Flash
  • Speed: 75 MHz

1200 in stock

Compare
Add to wishlist
SKU: CMMIC-0012 Category:
Description

Description of M25P40-VMN6TPB?

The M25P40 is a high-speed SPI-compatible bus that accesses a 4 Mbit (512 K 8) Serial Flash memory with sophisticated write protection measures. High performance instructions in the M25P40 enable clock frequencies of up to 75 MHz. (1) The Page Program instruction allows for the programming of the memory one to 256 bytes at a time. The memory is set up into 8 sectors, each of which has 256 pages.

There are 256 bytes on each page. As a result, the entire memory can be thought of as being made up of 2048 pages, or 524,288 bytes. Using the Bulk Erase command, the entire memory can be deleted, or the Sector Erase instruction can erase a single sector at a time.

A microcontroller’s SPI peripheral can operate in one of the two following modes to drive these devices:
1. CPHA = 0 &?CPOL = 0.
2. CPOL = 1 & CPHA = 1

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “M25P40-VMN6TPB”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

24LC256-I/SN
24LC256-I/SN
Compare

24LC256-I/SN

₹80.00
Features of? 24LC256-I/SN ? A single supply for use For? 24LC256-I/SN , it drops to 1.7V, whereas 24LC256 devices rise to 2.5V. ? CMOS Low-Power Technology: Maximum write current is 3 mA. Maximum standby current is 1 A. (I-temp.) ? I2C Compatible, Two-Wire Serial Interface ? Up to eight devices can be cascaded ? Noise-cancelling Schmitt Trigger Inputs ? Ground Bounce is eliminated through output slope control. ? Compatibility with 100 kHz, 400 kHz, and 1 MHz ? Maximum Page Write Time: 5 ms ? Timed Erase/Write Cycle on Your Own The 64-Byte Page Write Buffer Equipment Write-Protect ? >4000V ESD Protection ? Over a Million Eraser/Writer Cycles ? >200 years for data retention Factory programming is accessible for 24LC256-I/SN 24LC256-I/SN is RoHS conformant
Add to wishlist
Add to cart
Quick view
Compare

24LC512-I/SN

₹95.00
The 24AA512/24LC512/24FC512 (24XX512*) from Microchip Technology Inc. is a 64K x 8 (512 Kbit) Serial Electrically Erasable PROM that can operate over a wide voltage range (1.7V to 5.5V). It was created for cutting-edge, low-power applications including data collection and personal communications. Additionally, this device has a page write capacity of up to 128 bytes of information. Both random and sequential readings up to the 512K barrier are supported by this device. Up to eight devices can share a bus with functional address lines, providing a maximum address space of 4 Mbit. The common 8-pin plastic DIP, SOIJ, SOIC, TSSOP, DFN, and 14-lead TSSOP packaging are also available for this component. The 8-lead Chip Scale package is another option for the 24AA512. Features: ? A single supply that operates 24AA512 and 24FC512 devices at 1.7V and 24LC512 devices at 2.5V. ? CMOS Low-Power Technology: - A average active current of 400 uA - Typical standby current is 100 nA ? Compatible with 2-Wire Serial Interface and I2CTM ? Up to eight devices can be cascaded ? Noise-cancelling Schmitt Trigger Inputs ? Ground Bounce is eliminated through output slope control. ? Compatibility of 100 kHz and 400 kHz clocks ? Maximum Page Write Time 5 ms. ? Timed Erase/Write Cycle on Your Own ? Page Write Buffer of 128 bytes Equipment Write-Protect ? >4000V ESD Protection ? Over 1,000,000 Erase/Write Cycles ? 200 years of data retention ? The following packages are available: 8-lead PDIP, SOIJ, SOIC, BTSSOP, DFN, Chip Scale, and 14-lead TSSOP. ? RoHS and Pb-Free Compliant ? Ranges of temperatures Industrial (I): -40?F to 85?F Vehicle (E): -40 to 125C
Add to wishlist
Add to cart
Quick view
Compare

25AA320-I/SN

₹60.00
The Microchip Technology Inc. 25AA320/25LC320/25C320 (25XX320*) serial Electrically Erasable PROMs are 32 Kbit. A basic Serial Peripheral Interface (SPI) compliant serial bus is used to access the memory. A clock input (SCK) is required, as well as separate data in (SI) and data out (SO) lines. A Chip Selection (CS) input controls access to the device. The hold pin allows you to suspend communication with the gadget (HOLD). Transitions on the device's inputs will be ignored while it is stopped, excluding Chip Select, enabling the host to service higher priority interrupts. Features ? CMOS Low-Power Technology: - Maximum write current: 3 mA - Typical read current: 500 A - Typical standby current: 500 nA ? 4096 x 8 Bit Storage ? 32 bytes each page ? Maximum Write Cycle Time: 5 ms ? Erase and write cycles that are self-timed ? Write Block Protection: - Protect none, 1/4, 1/2, or the entire array. ? Integrated Write Protection: - Data protection circuitry that is switched on and off ? Latch for write enable - A write-protection pin ? Read in Sequence ? High dependability: - Endurance: 1 million E/W cycles - Data retention: more than 200 years - ESD protection: more than 4000V ? PDIP, SOIC, and TSSOP packages with 8 pins ? TSSOP Package with 14 Leads
Add to wishlist
Add to cart
Quick view
Compare

AT24CO2

₹25.00
The 1024/2048/4096/8192/16384 bits of serial electrically erasable and programmable read-only memory (EEPROM) provided by the AT24C01A/02/04/08A/16A are structured as 128/256/512/1024/2048 words of 8 bits each. The gadget is designed with a variety of industrial and business applications in mind, where low-power and low-voltage functioning are crucial. The AT24C01A/02/04/08A/16A is accessible through a Two-wire serial interface and is offered in compact 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead MAP, 5-lead SOT23 (AT24C01A/AT24C02/AT24C04), 8-lead TSSOP, and 8-ball dBGA2 packages. There are other variants of the complete series in 2.7V (2.7V to 5.5V) and 1.8V (1.8V to 5.5V) voltage ranges. Features Low and Standard Voltage Operation: 2.7 (VCC = 2.7 to 5.5 V) and 1.8 (VCC = 1.8 to 5.5 V) ?128 x 8, 256 x 8, 512 x 8, 1024 x 8, or 2048 x 8 internal organisation (16K) Bidirectional Data Transfer Protocol, Schmidt Trigger, Filtered Inputs for Noise Suppression, Two-wire Serial Interface, and Compatibility at 100 kHz (1.8V) and 400 kHz (2.7V, 5V) 8-byte page (1K, 2K), 16-byte page, Write Protect Pin for Hardware Data Protection (4K, 8K, 16K) Writing Styles ?High-reliability? Endurance: 1 Million Write Cycles? Data Retention: 100 Years ?Partial Page Writes Allowed ?Self-timed Write Cycle (5 ms max) ?Automotive Grade and Lead-free/Halogen-free Devices Available ?5-lead SOT23,8-lead TSSOP,8-lead PDIP,8-lead JEDEC SOIC,8-lead MAP, and 8-ball dBGA2 Packages ?Die Sales: Bumped Wafers, Waffle Packs, and Wafer Forms
Add to wishlist
Add to cart
Quick view
AT89C55WD-24PU
Compare

AT89C55WD-24PU – Microchip – 8 Bit MCU, 8051

₹300.00
A CMOS 8-bit microcontroller with 20K bytes of Flash programmable read-only memory and 256 bytes of RAM, the AT89C55WD is a low-power, high-performance device. The product is made using high-density flash storage technology from Atmel and has pinout and an instruction set that comply with industry standards 80C51 and 80C52. An ordinary nonvolatile memory programmer can user programme the programme memory thanks to the on-chip Flash. The Atmel AT89C55WD is a potent microcomputer that offers a very flexible and area of business to many embedded control applications by mixing a flexible 8-bit CPU with Flash on a monolithic chip. The following features are included as standard with the AT89C55WD: A full-duplex serial port, an on-chip oscillator, clock circuitry, three 16-bit timer/counters, 32 I/O lines, 256 bytes of RAM, 20K bytes of Flash, and a six-vector, two-level interrupt architecture. The AT89C55WD also features two software-selectable power-saving modes and static logic allowing operating down to zero frequency. The CPU is turned off in idle mode, but the RAM, timers and counters, serial port, and interruption system are still operational. The oscillator is frozen in the Power-down Mode, which also disables all other chip operations until the next error detection or device reset. However, the RAM contents are saved.
Add to wishlist
Add to cart
Quick view
Compare

HT9200A

₹25.00
The HT9200A/B tone generators are intended for use with C interfaces. aC can direct them to generate 16 dual tones and 8 single tones using the DTMF pin. The HT9200A has a serial mode, but the HT9200B has a selectable serial/parallel mode interface for a variety of applications such as surveillance systems, building automation, navigation system through telephone lines, communication systems, and so on.
Add to wishlist
Add to cart
Quick view
Compare

M29W800FB70N3F TR 3V, Parallel NOR Flash

₹224.00
NOR Flash 8Mb(x8/x16), 3V, Parallel NOR Flash, Bottom Boot, Automotive, 48TSOP, T&R
Add to wishlist
Add to cart
Quick view
W25Q16JV
Compare

W25Q16JV-SSIQ

₹41.00
Features of W25Q16JVSSIQ
  • SpiFlash Memories' New Family - 16M-bit/ 2M-byte W25Q16JV - Common SPI: CLK, /CS, DI, and DO - CLK, /CS, IO0, IO1 and Dual SPI - CLK, /CS, IO0, IO1, IO2, IO3 for Quad SPI. - Hardware and Software Reset
  • Best Serial Flash Performance - Single, Dual, and Quad SPI clocks at 133 MHz - Dual/Quad SPI equal to 266/532MHz - Continuous data transfer rate of 66 MB/S - No fewer than 100K Program-Erase cycles per sector - Retention of data for more than 20 years
  • A productive "Continuous Read"   - Constant Read with 8/16/32/64-Byte Wrap - Address memory with as few as 8 clocks - Facilitates real XIP (execute in place) operation - Performs better than X16 Parallel Flash  
  • Wide temperature range, low power - Single 2.7 to 3.6 volt supply - Operating range: -40 to +85 ?C. - Operating temperature range: -40 to +105 ?C. - Power-down, 1A.
  • 4KB sectors and flexible architecture - 4K/32K/64K-Byte Uniform Sector/Block Erase - Programmable pages can hold up to 256 bytes. - Delete/Suspend/Resume Program
  • Features of Advanced Security - Write-Protect in Software and Hardware - Lock-Down Power Supply and - Extraordinary OTP security - Protection for the top/bottom and complement arrays - Protection for individual blocks and sectors - Each device has a 64-Bit unique ID. - Register for Discoverable Parameters (SFDP) - OTP locks on 3X256-Byte Security Registers - Bits in the Volatile & Non-Volatile Status Register  
  • Effective Packaging for Space - 8-pin SOIC 150/208 mils - USON 8-pad 2X3mm/4X3mm - XSON 8-pad 4x4-mm - WSON 8-pad 6x5-mm ? 8-ball WLCSP - For KGD and additional alternatives, contact Winbond
 
Add to wishlist
Add to cart
Quick view