MCP604-I/P
₹111.00
The Microchip Technology Inc. MCP601/1R/2/3/4
family of low-power operational amplifiers (op amps)
are offered in single (MCP601), single with Chip Select
(CS) (MCP603), dual (MCP602), and quad (MCP604)
configurations. These op amps utilize an advanced
CMOS technology that provides low bias current, highspeed operation, high open-loop gain, and rail-to-rail
output swing. This product offering operates with a
single supply voltage that can be as low as 2.7V, while
drawing 230 ?A (typical) of quiescent current per
amplifier. In addition, the common mode input voltage
range goes 0.3V below ground, making these
amplifiers ideal for single-supply operation.
These devices are appropriate for low power, battery
operated circuits due to the low quiescent current, for
A/D convert driver amplifiers because of their wide
bandwidth or for anti-aliasing filters by virtue of their low
input bias current.
152 in stock (can be backordered)
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
71M6513H-IGT/F
Features
Line Frequency Range of 40-70Hz with the Same Calibration
7? Phase Compensation
RAM and RTC Battery Backup
22mW at 3.3V, backup power of 7.2W
Optional Flash Memory with Security
8-Bit MPU (80515)?One Clock Cycle for Each Instruction
LCD (168 Pixels) Driver
SSI Serial Output at High Speed
Time-of-Use Functions Using RTC
Hardware Timer Watchdog
Up to 22 General-Purpose I/O Pins are available.
64KB Flash and 7KB RAM
There are two UARTs for IR and AMR.
LQFP 100-Pin Package
ATMEGA48PA-PU Microcontroller
Microchip ATMEGA48PA-PU, 8bit AVR Microcontroller, ATmega, 20MHz, 4 kB Flash, 28-Pin PDIP
The ATmega48A/PA/88A/PA/168A/PA/328/P is a low power, CMOS 8-bit microcontrollers based on the AVR? enhanced RISC architecture. By executing instructions in a single clock cycle, the devices achieve CPU throughput approaching one million instructions per second (MIPS) per megahertz, allowing the system designer to optimize power consumption versus processing speed. Part Number: ATMEGA48PA-PU Manufacturer: Microchip Technology Description: IC MCU 8BIT 4KB FLASH 28DIP Detailed Description: AVR AVR? ATmega Microcontroller IC 8-Bit 20MHz 4KB (2K x 16) FLASH 28-PDIP atmega48pa-pu datasheet
MCP2551
Microchip Technology?s MCP2515 is a stand-alone
Controller Area Network (CAN) controller that implements the CAN specification, Version 2.0B. It is capable
of transmitting and receiving both standard and
extended data and remote frames. The MCP2515 has
two acceptance masks and six acceptance filters that
are used to filter out unwanted messages, thereby
reducing the host MCU?s overhead. The MCP2515
interfaces with microcontrollers (MCUs) via an industry
standard Serial Peripheral Interface (SPI).
MCP3202-BI/P
MCP3202 is a successive approximation 12-bit analog-to-digital (A/D) converter with on-board sample and hold circuitry. The MCP3202 is programmable to provide a single pseudo-differential input pair or dual single-ended inputs. Differential Nonlinearity (DNL) is specified at ?1 LSB, and Integral Nonlinearity (INL) is offered in ?1 LSB (MCP3202-B) and ?2 LSB (MCP3202-C) versions.
Communication with the device is done using a simple serial interface compatible with the SPI protocol. The device is capable of conversion rates of up to 100 ksps at 5V and 50 ksps at 2.7V. The MCP3202 operates over a broad voltage range, 2.7V to 5.5V. Low-current design permits operation with typical standby and active currents of only 500 nA and 375 ?A, respectively. The MCP3202 is offered in 8-pin MSOP, PDIP, TSSOP and 150 mil SOIC packages.
Part Number:MCP3202-BI/P
Manufacturer:Microchip Technology
Description:IC ADC 12BIT SAR 8DIP
Detailed Description: 12 Bit Analog to Digital Converter 1, 2 Input 1 SAR 8-PDIP
MCP3202-BI/P Datasheet
MCP3204-BI/P
The Microchip Technology Inc. MCP3204/3208
devices are successive approximation 12-bit Analogto-Digital (A/D) Converters with on-board sample and
hold circuitry. The MCP3204 is programmable to
provide two pseudo-differential input pairs or four
single-ended inputs. The MCP3208 is programmable
to provide four pseudo-differential input pairs or eight
single-ended inputs. Differential Nonlinearity (DNL) is
specified at ?1 LSB, while Integral Nonlinearity (INL) is
offered in ?1 LSB (MCP3204/3208-B) and ?2 LSB
(MCP3204/3208-C) versions.
MCP3208-BI/P
? 12-bit resolution
? ? 1 LSB max DNL
? ? 1 LSB max INL (MCP3204/3208-B)
? ? 2 LSB max INL (MCP3204/3208-C)
? 4 (MCP3204) or 8 (MCP3208) input channels
? Analog inputs programmable as single-ended or
pseudo-differential pairs
? On-chip sample and hold
? SPI serial interface (modes 0,0 and 1,1)
? Single supply operation: 2.7V - 5.5V
? 100 ksps max. sampling rate at VDD = 5V
? 50 ksps max. sampling rate at VDD = 2.7V
? Low power CMOS technology:
- 500 nA typical standby current, 2 ?A max.
- 400 ?A max. active current at 5V
? Industrial temp range: -40?C to 85?C
? Available in PDIP, SOIC and TSSOP packages
N79E352RADG Nuvoton Microcontroller
N79E352(R) is an 8-bit Turbo 51 microcontroller which has Flash EPROM programmable hardware writer. The instruction set of the N79E352(R) is fully compatible with the standard 8052. The N79E352(R) contains a 8Kbytes of main Flash EPROM; a 256 bytes of RAM; 128 bytes NVM Data Flash EPROM; three 16-bit timer/counters; 2-channel 8-bit PWM; 1-channel UART and 1 additional input capture. These peripherals are supported by 11 interrupt sources four-level interrupt capability.
To facilitate programming and verification, the Flash EPROM inside the N79E352(R) allows the program memory to be programmed and read electronically. Once the code is confirmed, the user can protect the code for security. N79E352(R) is designed for cost effective applications which can serve industrial devices, and other low power applications.
- Part Number: N79E352RADG-ND
- Manufacturer: Nuvoton Technology Corporation
- Description: IC MCU 8BIT 8KB FLASH 40DIP
- Detailed Description: 8051 N79 Microcontroller IC 8-Bit 24MHz 8KB (8K x 8) FLASH
PIC16F677-I/P PIC Microcontroller, 8051
The PIC16F677-I/P is a mid-range PIC16 family 8-bit powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS flash based Microcontroller packs powerful PIC®(RISC) architecture. This product offer all of the advantages of the well recognized mid-range x14 architecture with standardized features including 3.5kB of addressable program memory size, 128bytes of data memory size, 18 general-purpose I/O pins, two comparators and 12-channel 10-bit analog-to-digital (A/D) converter. This device operates at a maximum frequency of 20MHz with wide operating voltage of 2 to 5.5V.
Manufacturer: MICROCHIP
Manufacturer Part No: PIC16F677-I/P
Product Range: PIC16 Family PIC16F6XX Series Microcontrollers
PIC16F677-I/P Datasheet
Reviews
There are no reviews yet.