PIC18F4620-I/PT
₹650.00
Description / Summary? and Features of the Product? arev as below:
Ten distinct oscillator variants are available across the PIC18F2525/2620/4525/4620 family of devices, giving customers a wide range of possibilities when designing application hardware. Four crystal modes employing crystal or ceramic resonators are among them.
? Two external clock modes that allow for the use of either one pin (oscillator input with the additional pin designated as general I/O) or two pins (oscillator input plus a divide-by-4 clock output).
? Two additional RC oscillator modes that share the same pin configurations as external clock modes.
? An internal oscillator block that offers a total of 8 clock frequencies, 6 user-selectable clock frequencies between 125 kHz and 4 MHz, an INTRC source (about 31 kHz), and an 8 MHz clock. The two oscillator pins can now be used as extra general purpose I/O thanks to this option.
? A Phase Lock Loop (PLL) frequency multiplier that may be used with the Internal Oscillator and High-Speed Crystal modes to increase clock speeds up to 40 MHz. Without the need for an additional crystal or clock circuit, the PLL provides users with a full range of clock rates, from 31 kHz to 32 MHz, to be used with the internal oscillator.
Reviews (0)
Shipping & Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
PIC12F509 Microcontroller
The PIC12F509 device is low-cost, high-performance, 8-bit, fully-static, Flash-based CMOS micro controllers. They employ a RISC architecture with only 33 single-word/ single-cycle instructions. All instructions are single cycle (200 ?s) except for program branches, which take two cycles. The device deliver performance an order of magnitude higher than their competitors in the same price category. The 12-bit wide instructions are highly symmetrical, resulting in a typical 2:1 code compression over other 8-bit micro controllers in its class. The easy to use and easy to remember instruction set reduces development time significantly. It is equipped with special features that reduce system cost and power requirements. The Power-on Reset (POR) and Device Reset Timer (DRT) eliminate the need for external Reset circuitry. There are four oscillator configurations to choose from (six on the PIC16F505), including INTRC Internal Oscillator mode and the power-saving LP (Low-Power) Oscillator mode. Power-Saving Sleep mode, Watchdog Timer and code protection features improve system cost, power and reliability. The device is available in the cost-effective Flash programmable version, which is suitable for production in any volume. The customer can take full advantage of Microchip?s price leadership in Flash programmable micro controllers, while benefiting from the Flash programmable flexibility. It is supported by a full-featured macro assembler, a software simulator, an in-circuit emulator, a ?C? compiler, a low-cost development programmer and a full featured programmer. All the tools are supported on IBM? PC and compatible machines.
PIC12F510 Microcontroller
The PIC12F510 device is low-cost, high-performance, 8-bit, fullystatic, Flash-based CMOS micro controllers. They employ a RISC architecture with only 33 single-word/ single-cycle instructions. All instructions are single cycle except for program branches, which take two cycles. The PIC12F510 devices deliver performance in an order of a magnitude higher than their competitors in the same price category. The 12-bit wide instructions are highly symmetrical, resulting in a typical 2:1 code compression over other 8-bit micro controllers in its class. The easy-to-use and easy to-remember instruction set reduces development time significantly. The PIC12F510 product is equipped with special features that reduce system cost and power requirements. The Power-on Reset (POR) and Device Reset Timer (DRT) eliminate the need for external Reset circuitry. There are four oscillator configurations to choose from (six on the PIC16F506), including INTOSC Internal Oscillator mode and the Power-Saving LP (Low-power) Oscillator mode. Power-Saving Sleep mode, Watchdog Timer and code protection features improve system cost, power and reliability. The PIC12F510 device allow the customer to take full advantage of Microchip?s price leadership in Flash programmable micro controllers, while benefiting from the Flash programmable flexibility. The PIC12F510 products are supported by a full-featured macro assembler, a software simulator, an in-circuit emulator, a ?C? compiler, a low-cost development programmer and a full featured programmer.
PIC12F675 Microcontroller
The PIC12F675 has a 13-bit program counter capable of addressing an 8K x 14 program memory space. The data memory is partitioned into two banks, which contain the General Purpose Registers and the Special Function Registers. The register file is organized as 64 x 8 in the PIC12F675 device. Each register is accessed, either directly or indirectly, through the File Select Register FSR. There are as many as six general purpose I/O pins available. Depending on which peripherals are enabled, some or all of the pins may not be available as general purpose I/O. In general, when a peripheral is enabled, the associated pin may not be used as a general purpose I/O pin.
PIC16C54 Microcontroller
The PIC16C54 is powerful (200 nanosecond instruction execution) yet easy-to-program (only 33 single-word instructions) FLASH-based 8-bit micro controller packs Microchip?s powerful PICmicro? architecture into an 18-pin package. Easily adapted for automotive, industrial, appliances and consumer entry-level product applications.
PIC16C554 Microcontroller
The PIC16C554 is?powerful (200 nanosecond instruction execution) yet easy-to-program (only 35 single word instructions) CMOS OTP-based 8-bit micro controller packs Microchip?s powerful PIC? architecture into an 18-pin package. Easily adapted for automotive, industrial, appliances and consumer entry-level product applications.
PIC16C622 Microcontroller
The PIC16C622 device has enhanced core features, eight-level deep stack, and multiple internal and external interrupt sources. The separate instruction and data buses of the Harvard architecture allow a 14-bit wide instruction word with the separate 8-bit wide data. The two-stage instruction pipeline allows all instructions to execute in a single cycle, except for program branches (which require two cycles). A total of 35 instructions (reduced instruction set) are available. Additionally, a large register set gives some of the architectural innovations used to achieve a very high performance. PIC16C622 micro controllers typically achieve a 2:1 code compression and a 4:1 speed improvement over other 8-bit micro controllers in their class.
PIC16F677 Microcontroller
The PIC16F677 is a 20-Pin Flash-Based, 8-Bit CMOS Microcontrollers. The following are the features:-
??17 1/0 Pins and I Input-only Pin:
- High current source/sink for direct LED drive
- ?Interrupt-on-Change pin
- ?Individually programmable weak pull-ups
- Ultra Low-power Wake-up (LJLPWU)
? Analog Comparator Module With:
- TWO analog comparators
- Programmable on-chip voltage reference (CVREF) module (% of Voo)
- Comparator inputs and outputs externally accessible
- SR Latch mode
- Timer I Gate Sync Latch
-?Fixed O.6VVREF
? AID Converter:??ID-bit resolution and 12 channels
? Timer 8-Bit Timer/Counter With 8-Bit rammable Prescaler
PIC16F819 Microcontroller
The PIC16F819 is a 18/20-Pin Enhanced Flash Microcontrollers with nano Watt Technology. The following are the features:-
? 16 I/O pins with individual direction control
? High sink/source current: 25 mA
? Timer0: 8-bit timer/counter with 8-bit prescaler
? Timer1: 16-bit timer/counter with prescaler, can be incremented during Sleep via external crystal/clock
? Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler
? Capture, Compare, PWM (CCP) module:
- Capture is 16-bit, max. resolution is 12.5 ns
- Compare is 16-bit, max. resolution is 200 ns
- PWM max. resolution is 10-bit
? 10-bit, 5-channel Analog-to-Digital converter
Reviews
There are no reviews yet.