TLV75510PDBVR
TLV75510PDBVR
TLV75510PDBVR
Click to enlarge
TLV75510PDBVR
TLV75510PDBVR
TLV75510PDBVR
M24128-DRD
M24128-DRDW8TP/K ₹54.00
Back to products
DRV5032FADBZT
DRV5032FADBZT ₹35.00

TLV75510PDBVR

₹17.00

Features of?TLV75510PDBVR

? Input Voltage Range: 1.45 V to 5.5 V

? Low IQ: 25 ?A (Typical)

? Low Dropout: ? 238 mV (Maximum) at 500 mA (3.3 VOUT)

? Output Accuracy: 1% (Maximum at 85?C)

? Built-In Soft-Start With Monotonic VOUT Rise

? Foldback Current Limit

? Active Output Discharge

? High PSRR: 46 dB at 100 kHz

? Stable With a 1-?F Ceramic Output Capacitor

? Packages:

1. 2.9-mm ? 1.6-mm SOT-23-5
2. 1-mm x 1-mm X2SON-4
3. 2 mm ? 2 mm WSON-6

Applications of? TLV75510PDBVR

? TVs, gaming consoles, and Set-Top Boxes

? Battery-operated and portable equipment

??Desktops, notebook computers, and ultrabooks

? Remote controls and tablets

? Appliances and White Goods

? Grid Relays and Infrastructure for Protection

? Image sensors and camera modules

3000 in stock

Compare
Add to wishlist
SKU: CMPI-0131 Category:
Description

Description of TLV75510PDBVR

The TLV755P is a low-dropout, ultra-small low-quiescent current regulator (LDO) that generates 500 mA with good line and load transient performance. The TLV755P has an input voltage range of 1.45 V to 5.5 V, making it suitable for a wide range of applications.

The device is available in fixed output voltages ranging from 0.6 V to 5 V to support the lower core voltages of contemporary microcontrollers while minimizing cost and solution space (MCUs).In order to reduce standby power, the TLV755P also offers a low IQ with enable functionality.

This gadget has an internal soft-start to reduce inrush current, giving the load a controlled voltage and reducing input voltage loss during startup. In order to swiftly discharge the outputs during shutdown and guarantee a known start-up state, the device actively pulls down the output.

The TLV75510PDBVR is stable and has a modest total solution size thanks to its ceramic output capacitors. The typical accuracy of a precise band-gap and error amplifier is 1%.

There are incorporated thermal shutdown, current restriction, and under voltage lockout features in every device version (UVLO). The internal foldback current limit of the TLV755P aids in lowering heat dissipation in short-circuit situations.

 

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “TLV75510PDBVR”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Compare

DPA422PN

₹150.00
The DPA-Switch? IC family is a highly integrated solution for DC-DC conversion applications with 16-75 VDC input. DPA-Switch uses the same proven topology as TOPSwitch?, cost effectively integrating a power MOSFET, PWM control, fault protection and other control circuitry onto a single CMOS chip. High performance features are enabled with three user configurable pins. Hysteretic thermal shutdown is also provided. In addition, all critical parameters (i.e. current limit, frequency, PWM gain) have tight temperature and absolute tolerance, to simplify design and reduce system cost.
Add to wishlist
Add to cart
Quick view
Compare

LNK306PN IC – Power Integrations – AC-DC Off Line Switcher IC

₹94.00
The LNK306PN is specifically designed to replace all linear and capacitor-fed (cap dropper) non-isolated power supplies in the under 360 mA output current range at equal system cost while offering much higher performance and energy efficiency. LinkSwitch-TN devices integrate a 700 V power MOSFET, oscillator, simple On/Off control scheme, a high-voltage switched current source, frequency jittering, cycle-by-cycle current limit Figure 1. Typical Buck Converter Application (See Application Examples Section ? ?for Other Circuit Configurations).and thermal shutdown circuitry onto a monolithic IC. The start-up and operating power are derived directly from the voltage on the DRAIN pin, eliminating the need for a bias supply and associated circuitry in buck or fly back converters. The fully integrated auto-restart circuit in the LNK306 safely limits output power during fault conditions such as short-circuit or open loop, reducing component count and system-level load protection cost. ?A local supply provided by the IC allows use of a non-safety graded optocoupler acting as a level shifter to further enhance line and load regulation performance in buck and buck-boost converters.
Add to wishlist
Add to cart
Quick view
Compare

LNK419EG IC – Power Integrations – LED Driver Off Line Switcher IC

₹169.00
The LNK419EG dramatically simplifies implementation of LED drivers requiring long lifetime, high efficiency, PF >0.9, and TRIAC dimming capability(LNK403-410). The single-stage combined power factor and constant-current controller eliminates a switching stage and the electrolytic bulk capacitor. ?The advanced primary-side control used by the LNK419EG device provides accurate constant current control while eliminating the need for an optocoupler and current sensing circuits .LinkSwitch-PH incorporates a 725 V power FET, a continuous-mode PWM controller, a high-voltage switched current source for self biasing, frequency jittering, protection circuitry including cycle-by-cycle current limit and hysteretic thermal shutdown.
Add to wishlist
Add to cart
Quick view
Compare

PM8909

₹200.00
The PM8909 is a high efficiency monolithic stepdown switching regulator designed mainly for the DDR termination The device uses a COT control loop that provides very good performances in terms of load and line transients. The current sense is internally thermally compensated for optimum precision.  
Add to wishlist
Add to cart
Quick view
Compare

TNY286PG IC – Power Integrations Off Line Switcher IC

₹93.00
TNY286PG belongs to TinySwitch-4 Family from the manufacturer "Power Integrations". It is Energy-Efficient, Off-Line Switcher with Line Compensated Overload Power. It comes with following features
Add to wishlist
Add to cart
Quick view
Compare

TOP227YN IC – Power Integrations – Off Line Switcher IC

₹145.00
TOP227YN belongs to TOPSwitch-II Family from the manufacturer "Power Integration". It is three-Terminal Off-Line PWM Switch. Description The second generation TOPSwitch?-II family is more cost effective and provides several enhancements over the first generation TOPSwitch family. The TOPSwitch-II family extends the power range from 100W to 150W for 100/115/ 230 VAC input and from 50W to 90W for 85-265 VAC universal input. This brings TOPSwitch technology advantages to many new applications, i.e. TV, Monitor, Audio amplifiers, etc. Many significant circuit enhancements that reduce the sensitivity to board layout and line transients now make the design even easier. The standard 8L PDIP package option ?reduces cost in lower power, high efficiency applications. The internal lead frame of this package uses six of its pins to transfer heat from the chip directly to the board, eliminating the cost of a heat sink. TOPSwitch incorporates all functions necessary for a switched mode control system into a three terminal monolithic IC: power MOSFET, PWM controller, high voltage start up circuit, loop compensation and fault protection circuitry.
Add to wishlist
Add to cart
Quick view
Compare

TOP245YN IC – Power Integrations – Off Line Switcher IC

₹143.00
TOP245YN belongs to TOPSwitch-GX Family from the manufacturer "Power Integrations". It is with Extended Power, Design Flexiblity, EcoSmart & Integrated Off-line Switcher. TOPSwitch-GX uses the same proven topology as TOPSwitch, cost effectively integrating the high voltage power MOSFET, PWM control, fault protection and other control circuitry onto a single CMOS chip. Many new functions are integrated to reduce system cost and improve design flexibility, performance and energy efficiency. Depending on package type, either 1 or 3 additional pins over the TOPSwitch standard DRAIN, SOURCE and CONTROL terminals allow the following functions: line sensing (OV/UV, line feed-forward/DCMAX reduction), accurate externally set current limit, remote ON/OFF, synchronization to an external lower frequency, and frequency selection (132 kHz/66 kHz). All package types provide the following transparent features: Soft-start, 132 kHz switching frequency (automatically reduced at light load), frequency jittering for lower EMI, wider DCMAX, hysteretic thermal shutdown, and larger creepage packages. In addition, all critical parameters (i.e. current limit, frequency, PWM gain) have tighter temperature and absolute tolerances to simplify design and optimize system cost.
Add to wishlist
Add to cart
Quick view
Compare

TOP248YN IC – Power Integrations – Off Line Switcher IC

₹143.00
TOP248YN belongs to TOPSwitch-GX Family from the manufacturer "Power Integrations". It is with Extended Power, Design Flexiblity, EcoSmart & Integrated Off-line Switcher. TOPSwitch-GX uses the same proven topology as TOPSwitch, cost effectively integrating the high voltage power MOSFET, PWM control, fault protection and other control circuitry onto a single CMOS chip. Many new functions are integrated to reduce system cost and improve design flexibility, performance and energy efficiency. Depending on package type, either 1 or 3 additional pins over the TOPSwitch standard DRAIN, SOURCE and CONTROL terminals allow the following functions: line sensing (OV/UV, line feed-forward/DCMAX reduction), accurate externally set current limit, remote ON/OFF, synchronization to an external lower frequency, and frequency selection (132 kHz/66 kHz). All package types provide the following transparent features: Soft-start, 132 kHz switching frequency (automatically reduced at light load), frequency jittering for lower EMI, wider DCMAX, hysteretic thermal shutdown, and larger creepage packages. In addition, all critical parameters (i.e. current limit, frequency, PWM gain) have tighter temperature and absolute tolerances to simplify design and optimize system cost.
Add to wishlist
Add to cart
Quick view