NE556 IC - Dual Timer IC
Click to enlarge
DS1307 IC - Real Time Clock (RTC) IC ₹33.00
Back to products
NE555 Timer IC DIP-8 Package ₹7.00

NE556 IC – Dual Timer IC

₹27.00

NE556 IC devices provide two independent timing circuits of the NE555 ?type in each package. These circuits can be operated in the a stable or the monostable mode with external resistor-capacitor (RC) timing control. The basic timing provided by the RC time constant can be controlled actively by modulating the bias of the control-voltage input. The threshold (THRES) and trigger (TRIG) levels normally are two-thirds and one-third, respectively, of VCC. These levels can be altered by using the control voltage (CONT) terminal. When the trigger input falls below trigger level, the flip-flop is set and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset, and the output is low. The reset (RESET) input can override all other inputs and can be used to initiate a new timing cycle. When RESET goes low, the flip-flop is reset and the output goes low. When the output is low, a low-impedance path is provided between the discharge (DISCH) terminal and ground (GND).

NE556 IC Datasheet

1000 in stock (can be backordered)

Add to compare
Add to wishlist
SKU: CMTRTC-0004 Categories: ,
Description

Features of NE556 IC ? Dual Timer IC

  • Two Precision Timing Circuits Per Package
  • Astable or Monostable Operation
  • TTL-Compatible Output Can Sink or Source up to 150 mA
  • Active Pull up or Pull down
  • Designed to Be Interchangeable With Signetics NE556

Specification of NE556 IC – Dual timer IC

Symbol Parameter Min Max Unit
VCC Supply voltage 4.5 16 V
VI Input voltage vcc V
IO Output current ?200 mA
TA Operating free-air temperature 0 70 ?C
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “NE556 IC – Dual Timer IC”

Your email address will not be published. Required fields are marked *

Shipping & Delivery

MAECENAS IACULIS

Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.

ADIPISCING CONVALLIS BULUM

  • Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
  • Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
  • Diam parturient dictumst parturient scelerisque nibh lectus.

Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.

Related products

Add to compare

DS1225AD-150+

₹1,400.00
The DS1225AB and DS1225AD are 65,536-bit nonvolatile SRAMs that are structured as 8192 words by 8 bits. Each NV SRAM contains its own lithium energy source as well as control circuitry that constantly monitors VCC for out-of-tolerance conditions. When this occurs, the lithium energy source is automatically activated, and write protection is enabled permanently to avoid data corruption. The NV SRAMs can be used in place of conventional 8k ? 8 SRAMs that are directly compatible with the common byte wide 28-pin DIP standard. The devices also have the same pinout as the 2764 EPROM and 2864 EEPROM, allowing for direct replacement while improving performance. The amount of write cycles that can be performed is not limited, and no extra assistance circuitry is required for microprocessor connection.
Add to wishlist
Add to cart
Quick view
Add to compare

DS1225AD-200+

₹1,300.00
The DS1225AB and DS1225AD are 65,536-bit nonvolatile SRAMs that are structured as 8192 words by 8 bits. Each NV SRAM contains its own lithium energy source as well as control circuitry that constantly monitors VCC for out-of-tolerance conditions. When this occurs, the lithium energy source is automatically activated, and write protection is enabled permanently to avoid data corruption. The NV SRAMs can be used in place of conventional 8k ? 8 SRAMs that are directly compatible with the common byte wide 28-pin DIP standard. The devices also have the same pinout as the 2764 EPROM and 2864 EEPROM, allowing for direct replacement while improving performance. The amount of write cycles that can be performed is not limited, and no extra assistance circuitry is required for microprocessor connection.
Add to wishlist
Add to cart
Quick view
DS1232 MicroMonitor Chip
Add to compare

DS1232 MicroMonitor Chip

,
₹40.00
  DS1232 Micro Monitor? Chip monitors three vital conditions for a microprocessor: power supply, software execution, and external override. First, a precision temperature-compensated reference and comparator circuit monitors the status of VCC. When an out-of-tolerance condition occurs, an internal power fail signal is generated which forces reset to the active state. When VCC returns to an in-tolerance condition, the reset signals are kept in the active state for a minimum of 250 ms to allow the power supply and processor to stabilize. The second function the DS1232 performs is push button reset control. The DS1232 debounces the push button input and guarantees an active reset pulse width of 250 ms minimum. The third function is a watchdog timer. The DS1232 has an internal timer that forces the reset signals to the active state if the strobe input is not driven low prior to timeout. The watchdog timer function can be set to operate on timeout settings of approximately 150 ms, 600 ms, and 1.2 seconds. DS1232 Datasheet
Add to wishlist
Add to cart
Quick view
Add to compare

DS12C887+

₹1,350.00
The real-time clocks (RTCs) DS12885, DS12887, and DS12C887 are intended to be straight replacements for the DS1285 and DS1287. The devices have a real-time clock/calendar, one time-of-day alarm, three maskable interrupts with a shared interrupt output, a programmable square wave, and 114 bytes of battery-backed static RAM (113 bytes in the DS12C887 and DS12C887A). In a 24-pin enclosed DIP device, the DS12887 incorporates a quartz crystal and a lithium energy supply. At address 32h, the DS12C887 adds a century byte. For all devices, the end-of-month date is automatically modified for months with fewer than 31 days, including leap years. The devices can also be set to operate in 24-hour or 12-hour mode and have an AM/PM indicator. The status of VCC is monitored using a precision temperature-compensated circuit. If the primary power supply fails, the device immediately switches to a backup supply. When primary power is not available, a lithium coin-cell battery can be attached to the DS12885's VBAT input pin to keep the time and date running. The device is addressed via a multiplexed byte-wide interface that supports both Intel and Motorola modes of operation.
Add to wishlist
Add to cart
Quick view
Add to compare

DS1307 IC – Real Time Clock (RTC) IC

₹33.00
The DS1307 Serial Real-Time Clock is a low-power, full binary-coded decimal (BCD) clock/calendar plus 56 bytes of NV SRAM. Address and data are transferred serially via a 2-wire, bi-directional bus. The clock/calendar provides seconds, minutes, hours, day, date, month, and year information. The end of the month date is automatically adjusted for months with fewer than 31 days, including corrections for leap year. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. The DS1307 has a built-in power sense circuit that detects power failures and automatically switches to the battery supply.
Add to wishlist
Add to cart
Quick view
LM311N/NOPB Texas Instruments
Add to compare

IC LM311N

,
₹25.00
LM111 series of voltage comparators have input currents that are about a 100 times lower than the A710. They're made to work with a larger range of supply voltages, ranging from normal 15 V op amp supplies to a single 3 V supply. RTL, DTL, and TTL circuits, as well as MOS circuits, can use their output. They can also power bulbs or relays with changing voltages up to 50 V and currents up to 50 mA. The LM111 series' inputs and outputs can both be separated from system ground, and the output can drive loads connected to ground, positive supply, or negative supply. There is offset equalization and strobe functionality, and wire-O Red outputs are available.
  • Manufacturer: Texas Instruments
  • Manufacturer Part Number:LM311N/NOPB
  • Description: IC VOLTAGE COMPARATOR 8-DIP
  • Detailed Description: Comparator General Purpose DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL 8-PDIP
LM311N Datasheet
Add to wishlist
Add to cart
Quick view
IRFP250N MOSFET
irfp250n mosfet
Add to compare

IRFP250N MOSFET – 200V 30A N-Channel Power MOSFET TO-247 Package

,
₹65.00
IRFP250N is new generation of high voltage MOSFET family that is utilizing an advanced charge balance mechanism for outstanding low on-resistance and lower gate charge performance. This advanced technology has been tailored to minimize conduction loss, provide superior switching performance, and withstand extreme dv/dt rate and higher avalanche energy. It is very suitable for various AC/DC power conversion in switching mode operation for system miniaturization and higher efficiency.
  • Manufacturer:INFINEON
  • Manufacturer Part No:IRFP250N
  • Technical Datasheet:IRFP250N Datasheet
Add to wishlist
Add to cart
Quick view
LM348N
Add to compare

LM348N

,
₹67.00
LM148, LM248, and LM348 are quadruple, independent, high-gain, internally compensated operational amplifiers designed to have operating characteristics similar to the ?A741. These amplifiers exhibit low supply-current drain and input bias and offset currents that are much less than those of the ?A741.
  • Manufacturer:Texas Instruments
  • Manufacturer Part Number: LM348N
  • Description: IC OPAMP GP 4 CIRCUIT 14DIP
  • Detailed Description: General Purpose Amplifier 4 Circuit 14-PDIP
LM348N Datasheet
Add to wishlist
Add to cart
Quick view